User`s manual

3-2 Loading a Workpiece
Chapter 3 Operation
34
4. Use the live center to secure the workpiece in place.
➊
Mount the live center on the core support.
➋
Loading the workpiece.
➌
Loosen the core-support retaining lever.
Move the core support and bring the live center into con-
tact with the workpiece.
Line up the workpiece-support hole and the tip of the live center
and attach.
➍
Tighten the core-support retaining lever.
Core support
Live center
2. Turn the handle to extend
the end about 5 mm.
3. Insert
About 5 mm
1. Loosen
Core support
Core-support retaining lever
Workpiece-support hole
Core support
Core-support retaining lever