User`s manual

3-2 Loading a Workpiece
Chapter 3 Operation
35
➎
Turn the core-support adjuster half a turn.
Tighten the adjuster lock completely.
Securing the Workpiece in Place
After securing the workpiece in place using the live center, go to the operation-panel screen and rotate the A axis. If
the workpiece and the live center turn together, the workpiece is fastened securely. If the live center does not turn,
loosen the adjuster lock, turn the core-support adjuster, then secure the control in place again with the adjuster lock.
1. Turn
2. Tighten completely
Core-support adjuster
Adjuster lock