Owner`s manual
Table Of Contents
- Important notes
- Features
- Contents
- Panel description
- Shortcut list
- Before you start using the BK7m
- Connecting the AC adaptor
- Connecting the BK7m to an amplifier, mixer, etc.
- Connecting a MIDI device
- Connecting the BK7m to your computer
- Connecting a television set
- Connecting an optional footswitch, pedal or pedal unit
- Attaching the BK7m to a stand
- Listening through headphones
- Turning the power on/off
- Demo of the BK7m
- Basic operation of the BK7m
- Wizard Connection
- Playing the BK7m’s real-time parts
- Music Style functions
- Using the BK7m as a USB player
- Other important functions
- Performance Lists
- Recording your performance as audio data
- Cover functions for Music Styles and SMF songs
- Menu options
- General procedure
- ‘Performance Edit’ parameters
- ‘Global’ parameters
- MIDI parameters
- Mastering Tools
- Makeup Tools (Style and SMF)
- VLINK function
- Factory Reset
- Formatting a USB memory
- Using the BK7m with SONAR LE
- Troubleshooting
- ‘Wizard Connection’ settings
- Music Style list
- Tone List
- Drum Sets
- Specifications
- MIDI Implementation Chart
- MFX types and parameters
- Index
Menu options
54
r
Backing Module BK-7m
Vibrato Delay
This parameter adjusts the time required for the
vibrato effect to begin. Positive (+) settings increase
the time before vibrato will begin and negative set-
tings shorten the time.
C1
The function of this parameter depends on the sound
you assigned to the selected part. It may influence
the filter and Resonance setting, switch between the
organ samples with the fast and slow Rotary modu-
lation, etc.
Key Range Lower, Key Range Upper
The “Key Range Lower” and “Key Range Upper”
parameters allow you to set the note range to be
received for the selected part.
NOTE
The “Upper Range Lower” value cannot be higher than or
equal to “Key Range Upper” (and vice versa).
‘Tone Part Effects’ parameters
This function group can be selected using [MENU] but-
ton ‰ “Performance Edit” ‰ “Tone Part Effects”.
1.
Use the [CURSOR÷VALUE] dial to select and
set the desired effects processor (Mfx,
Reverb, Chorus).
The display shows the settings for the selected real-
time part.
The following parameters are available:
a) Mfx parameters
This function group can be selected using [MENU]
button ‰ “Performance Edit” ‰ “Tone Part Effects” ‰
“Mfx”.
Your BK-7m contains a multi-effects processor that
can be used for processing any real-time part you
like. See “Mfx” on p. 52. (There are also 3 Mfx proces-
sors for the Style/Song parts.)
Mfx Switch
Select “Off” if you don’t need the Mfx processor.
Parameter Setting
Vibrato Delay –64~+63
Parameter Setting
C1 0~127
Parameter Setting
Key Range Lower C1~G9
Key Range Upper C1~G9
Parameter Setting
Mfx Switch Off, On
BK-7m_UK.book Page 54 Tuesday, January 4, 2011 9:25 AM