User Manual
Table Of Contents
- Important notes
- Features
- Contents
- Panel description
- Shortcut list
- Before you start using the BK5OR
- Connecting the AC adaptor
- Connecting the BK5OR to an amplifier, mixer, etc.
- Connecting a MIDI device
- Connecting the BK5OR to your computer
- Connecting a television set
- Connecting an optional footswitch, hold pedal or expression pedal
- Connecting a portable audio player
- Listening through headphones
- Installing the music rest
- Turning the power on/off
- Demo of the BK5OR
- Basic operation of the BK5OR
- Playing the BK5OR’s real-time parts
- Rhythm functions
- Using the BK5OR as a USB player
- Getting ready to use the BK5OR as a USB player
- Selecting a song or rhythm on a USB memory
- Playing back a song or rhythm from a USB memory
- Renaming or deleting files/folders on a USB memory
- Using the ‘Search’ function to locate songs, rhythms or pictures
- Activating the ‘Play All Songs’ parameter for the USBmemory
- Loop function (MARK A/B)
- Other important functions
- Performance Lists
- Performance/Music Assistant/ Factory Songs info
- Loading a Performance/‘Music Assistant’/‘Factory Songs’ List
- Recalling a Performance/‘Music Assistant’/‘FactorySongs’memory
- Quickly locating Performance memories
- Saving your settings as a Performance
- Other Performance List functions
- Editing Performance memories
- Adding pictures to the music
- Recording your performance as audio data
- Lock functions
- Menu options
- General procedure
- Internal Lyrics
- ‘Performance Edit’ parameters
- ‘Tone Part View’ parameters
- Tone
- Volume
- Reverb Send
- Chorus Send
- Panpot
- Key Touch (velocity sensitivity)
- Eq Part Edit
- Mfx
- Expression Pedal
- Pedal Exp Down/Up
- Hold Pedal
- Octave Shift
- Coarse Tune
- Fine Tune
- Portamento Mode
- Portamento Time
- Bender Assign
- Bender Range
- Modulation Assign
- Cut Off
- Resonance
- Attack (only for Tones)
- Decay
- Release
- Vibrato Rate
- Vibrato Depth
- Vibrato Delay
- C1
- ‘Tone Part MFX’ parameters
- ‘Rhythm Parts’ parameters
- Split
- Scale Tune Switch
- Scale Tune
- Key
- ‘Arranger Setting’ parameters
- ‘Melody Intelligent’ parameters
- Save As Default
- ‘Tone Part View’ parameters
- ‘Global’ parameters
- Mastering Tools
- Makeup Tools (rhythms and SMF)
- Rhythm Composer (programming your own rhythms)
- Clearing the RAM memory (Initialize Rhythm)
- Getting ready for the first track
- Recording a rhythm pattern
- Auditioning your rhythm and adding more tracks
- Saving your rhythm
- Recording other tracks and divisions
- Help function on the main Rhythm Composer page
- Muting tracks while recording others
- Solo
- Rhythm Track Edit functions
- Editing individual rhythm events (Micro Edit)
- MIDI parameters
- Factory Reset
- Formatting a USB memory
- Visual Control function
- Troubleshooting
- Specifications
- MIDI Implementation Chart
- Chord Intelligence
- Index
Menu options
114
r
Backing Keyboard BK-5 OR
In “Absolute” mode, however, the MIDI note numbers
sent to other instruments will be the ones of the keys
you actually press.
Rx Velocity
Your BK-5 is equipped with a velocity-sensitive key-
board and a tone generator capable of responding to
velocity messages. This parameter allows you to
switch the reception (RX) of velocity messages on or
off. If you don’t need “On”, specify which velocity
value to use instead of the continuous flux. This value
will be used for all notes received via MIDI..
Rx SySex
Use this parameter to specify whether the BK-5 OR
should receive SysEx messages from other devices.
Rx Transpose
Use this parameter to specify whether or not the
BK-5 OR should transpose the MIDI note messages it
receives.
Soft Thru
Select “On” if the BK-5 OR should transmit all MIDI
messages it receives (using its MIDI OUT socket).
Visual Control TxCh
This parameter allows you to set the MIDI transmit
channel for the Visual Control function. (The BK-5 OR
does not receive Visual Control messages.) By default,
this channel is set to 16.
Save MIDI Set
This function allows you to save your changes to a
“User” memory for quick recall.
This function can be selected using the [WRITE] button
while the “MIDI” page is displayed.
1.
Edit the desired MIDI parameters (“Edit
Rhythm Parts”, “Edit Song Parts”, “Edit Tone
Parts”, “Edit System”).
2.
Press the [WRITE] button.
The display changes to:
3.
Rotate the [CURSOR÷VALUE] dial to select
the MIDI Set where you want to save your
settings (“User1”~ “User8”).
4.
Press the [ENTER/SELECT] button to confirm.
A confirmation message informs you that the MIDI
Set has been saved.
If you change the MIDI settings after loading a “User”
set, the BK-5 OR alerts you to the fact that you may
need to save the MIDI Set again (provided, you want
to keep your changes):
Parameter Setting
Octave Tx Relative, Absolute
Parameter Setting
Rx Velocity On, 1~127
Parameter Setting
Rx SySex Off, On
Parameter Setting
Rx Transpose Off, On
Parameter Setting
Soft Thru Off, On
Parameter Setting
Visual Control TxCh 1~16
BK-5or_US.book Page 114 Monday, February 13, 2012 12:19 PM