User Manual

Activating the ‘Play All Songs’ parameter for the USB memory
Backing Keyboard BK-5 OR r
41
5. Press the [ENTER/SELECT] button.
The display changes to:
The first character position is already selected (“A”).
6. Use the TONE buttons to select a different
character.
7. Rotate the [CURSOR÷VALUE] dial to select
the next character position you want to
change, then use the TONE buttons again.
You can press the [NUMERIC] button to switch
between upper- and lower-case characters as well as
numbers. The [LWR] button can be used to delete the
selected character. The [UP2] button allows you to
insert a character.
8. Repeat steps (6)~(7) to complete the char-
acter string you are looking for.
9. Press the [ENTER/SELECT] button to start
the search.
NOTE
If you decide that you don’t want to use the “Search” func-
tion, press [EXIT] instead of [ENTER/SELECT].
The BK-5 OR searches the USB storage device for files
whose names match the character string you entered
and displays them. The title bar shows the path of the
folder that contains the selected files.
NOTE
The “Search” function can find and display 100 files at a
time.
10. Rotate the [CURSOR÷VALUE] dial to select
the song or rhythm you want to play back,
then press the [ENTER/SELECT] button to
confirm your selection.
11. Press the [EXIT] button to close the list.
12. Press the [START/STOP] button to start play-
back of the selected song or rhythm.
Activating the ‘Play All Songs’
parameter for the USB memory
The “Play All Songs” parameter allows you to play back
all audio songs (WAV and mp3) or SMF songs on the
connected USB memory.
1. Connect an optional USB memory to the
BK-5 OR.
After a few seconds, the display shows the contents
of the USB memory.
Press the [USB MEMORY] button if you inserted the
USB memory at an earlier stage and now want to
return to this display page.
BK-5or_US.book Page 41 Monday, February 13, 2012 12:19 PM