User Manual

Menu options
64
r
Backing Keyboard BK-5 OR
Mfx Type
The BK-5 OR provides 84 different multi-effect types,
some of which are combinations of two effects for
added flexibility. This parameter allows you to select
the desired type. The available types are:
NOTE
Some of the names shown above may be abbreviated in the
display.
Mfx Edit
If you also want to edit the parameters of the
selected effect type, press the [ENTER/SELECT] button
to jump to the “Mfx Edit” page. You can then use the
[CURSOR÷VALUE] dial to edit the available parame-
ters.
The first two parameters for each Mfx type are “Cho-
rus Send” (0~127) and “Reverb Send” (0~127). They
allow you to specify whether—and to what
extent—the Mfx signal should be processed by the
Chorus and/or Reverb effect.
‘Rhythm Parts’ parameters
This function group can be selected using [MENU] but-
ton ‰ “Performance Edit” ‰ “Rhythm Parts”.
The parameters of this function group apply to the eight
Arranger parts (i.e. the parts used to play back the
selected rhythm).
1. Use the [CURSOR÷VALUE] dial and the
[ENTER/SELECT] button to select the rhythm
part you want to edit (ADrum, ABass, Acc1,
Acc2, Acc3, Acc4, Acc4, Acc5, Acc6).
The display shows the settings for the selected part.
2. Use the [CURSOR÷VALUE] dial to select the
desired parameter(s), then press the [ENTER/
SELECT] button.
3. Rotate the [CURSOR÷VALUE] dial to set the
value.
The following parameters are available:
Mute
Allows you to mute the selected part, so that it is no
longer audible.
Solo
Allows you to solo the selected part, which means
that all other rhythm parts are switched off.
Volume
Adjusts the volume of the selected rhythm part.
Selecting “0” means that the part is question is no
longer audible.
Exp. Pedal
Select “Off” if you don’t need pedal expression for the
selected part. This means that the rhythm part in
question no longer responds to an expression pedal
you may have connected to the SWITCH/EXPRESSION
socket.
1. Thru
2. Stereo EQ
3. Overdrive
4. Distortion
5. Phaser
6. Spectrum
7. Enhancer
8. Auto Wah
9. Rotary
10. Compressor
11. Limiter
12. Hexa-Chorus
13. Trem Chorus
14. Space-D
15. St. Chorus
16. St. Flanger
17. Step Flanger
18. St. Delay
19. Mod. Delay
20. 3 Tap Delay
21. 4 Tap Delay
22. Time Delay
23. 2 Pitch Shifter
24. FBK Pitch
25. Reverb
26. Gate Reverb
27. OD‰ Chorus
28. OD‰ Flanger
29. OD‰ Delay
30. DST‰ Chorus
31. DST‰ Flanger
32. DST‰ Delay
33. EH‰ Chorus
34. EH‰ Flanger
35. EH‰ Delay
36. Chorus‰ DLY
37. Flanger‰ DLY
38. CHO‰ Flanger
39. CHO/DLY
40. Flanger/DLY
41. CHO/Flanger
42. Isolator
43. Low Boost
44. Super Filter
45. Step Filter
46. Humanizer
47. Speaker Sim
48. Step Phaser
49. MLT Phaser
50. Inf Phaser
51. Ring Modul
52. Step Ring
53. Tremolo
54. Auto Pan
55. Step Pan
56. Slicer
57. VK Rotary
58. 3D Chorus
59. 3D Flanger
60. 3D Step Flgr
61. Band Chorus
62. Band Flanger
63. Band Step Flg
64. VS Overdrive
65. VS Distortion
66. GT Amp Simul
67. Gate
68. Long Delay
69. Serial Delay
70. MLT Tap DLY
71. Reverse DLY
72. Shuffle DLY
73. 3D Delay
74. Long Time DLY
75. Tape Echo
76. LoFi Noise
77. LoFi Comp
78. LoFi Radio
79. Telephone
80. Phonograph
81. Step Pitch
82. Sympa Reso
83. Vib-Od-Rotary
84. Center Canc
Parameter Setting
Mute Off, On
Parameter Explanation
Solo Off, On
Parameter Setting
Volume 0~127
Parameter Setting
Exp. Pedal Off, On
BK-5or_US.book Page 64 Monday, February 13, 2012 12:19 PM