User's Manual

Before You Start Playing

Once the connections have been completed (p. 22), turn on

power to your various devices in the order specified. By turning

on devices in the wrong order, you risk causing malfunction

and/or damage to speakers and other devices.

Make sure of the following before the power is turned

on.

• Is the power cord correctly connected to the AC inlet?

• Is the power cord correctly connected to the AC outlet?

Turn the [Master Volume] knob all the way to the left to

minimize the volume.

Press the [POWER] switch to turn on the power.

* Always make sure to have the volume level turned down before

switching on power. Even with the volume all the way down, you

may still hear some sound when the power is switched on, but this is

normal, and does not indicate a malfunction.

For the C-380

For the C-330

The main screen will appear in the display.

This unit is equipped with a protection circuit. A brief interval

(a few seconds) after power up is required before the unit will

operate normally.

Select a stop.

For details, refer to “Playing Various Sounds” (p. 29).

Even though the power has been turned on, playing the

keyboard will not produce sound until you’ve selected a sound

(stop).

Adjust the volume to an appropriate level by moving the

[Master Volume] knob.

Adjust the volume while you play the keyboard to produce sound.

Turning the knob toward the right will increase the volume, and

turning it toward the left will decrease the volume.

Depress the expression pedal to the maximum volume.

Turning the Power On and Off

Turning On the Power

The top side is pressed ON

Lower position ON

Increase the VolumeDecrease the Volume

C-380_330_e.book 24 ページ２０１０年４月２８日　水曜日　午後１０時１１分