User`s manual

iv
To Ensure Safe Use
Never disassemble or modify
this product.
Do not allow liquids, metal
objects or flammables inside the
machine.
Fire or
breakdown
may result.
Do not step on or damage the power
cord, or allow heavy objects to be
placed atop it. Failure to heed this may
result in
electrocution
or fire.
Handle the power cord with care. When pulling the power cord
from an electrical socket, be
sure to grip the plug.
Do not install in an unstable or
high location.
Do not
installation the
machine on the
edge of a table,
or it may fall.
Unpacking, installation, and
moving must be carried out by
two or more persons.
Do not drop when unpacking,
installing, or moving.
Do not carelessly insert the
hands while in operation.
Do not use cutting oil when
performing cutting.
Perform dry cutting with no cutting oil.
Use of cutting oil may result in fire or
machine failure.
Blocking the ventilation holes at the
rear of the unit may prevent heat
radiation and cause fire.
Do not block the ventilation holes.
If the transparent cover at the front or
the side of the unit is cracked, contact a
service agent immediately for repairs.
Do not operate if a transparent
cover is cracked or broken.
If the safety device is removed, which
is very dangerous.
Wash hands when finished.
Wash hands with
water to remove
any adhering
cutting chips.
The fingers may become caught by
moving parts (during manual opera-
tion.)