CD-2u_SD-2u_e.book 1 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Owner’s Manual This owner’s manual applies to both the CD-2u and the SD-2u. A icon or icon will be used to mark explanations that pertain only to a specific model. Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (Page 8–11; Page 12–13). These sections provide important information concerning the proper operation of the unit.
CD-2u_SD-2u_e.book 2 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 For the U.K. IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
CD-2u_SD-2u_e.book 3 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Check the Included Items ❍ CD-2u/SD-2u (The illustration depicts the ❍ Owner’s Manual Checking / Preparations The CD-2u/SD-2u includes the following items. Please take a moment to confirm that all of these items have been included with the CD-2u/SD-2u. If you find that any item is missing, contact the nearest authorized Roland distributor in your country.
CD-2u_SD-2u_e.book 4 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Table of Contents Checking and Preparations USING THE UNIT SAFELY ............................................................................. 8 IMPORTANT NOTES................................................................................... 12 Panel Descriptions ..................................................................................... 14 Recordable Media and Functionality.........................................................
CD-2u_SD-2u_e.book 5 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Table of Contents (continued) Deleting Deleting Songs Individually .................................................................................. 86 Erasing All Tracks .................................................................................................. 87 Deleting an Unwanted Region at the Beginning of the Song (Trim In).................. 88 Deleting an Unwanted Region at the End of the Song (Trim Out).........................
CD-2u_SD-2u_e.
CD-2u_SD-2u_e.
CD-2u_SD-2u_e.book 8 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 USING THE UNIT SAFELY The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
CD-2u_SD-2u_e.book 9 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 USING THE UNIT SAFELY (continued) .................................................................................... 012b Do not use overseas Before using the unit in overseas, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page. ...................................................................................
CD-2u_SD-2u_e.book 10 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 USING THE UNIT SAFELY (continued) 101b Place in a well ventilated location The unit and the AC adaptor should be located so their location or position does not interfere with their proper ventilation. .................................................................................... 101c-edit Use only the specified stand This unit is designed to be used in combination with specific stand (SS-PC1) manufactured by Roland.
CD-2u_SD-2u_e.book 11 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 USING THE UNIT SAFELY (continued) Convenient Functions Deleting Creating a CD .................................................................................... Listening .................................................................................... 123 Handle leaking batteries carefully • If fluid has leaked from a battery, make sure not to touch it with your bare hands.
CD-2u_SD-2u_e.book 12 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 IMPORTANT NOTES 352b Power Supply 301 ● Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter or a motor (such as a refrigerator, washing machine, microwave oven, or air conditioner). Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise.
CD-2u_SD-2u_e.book 13 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 IMPORTANT NOTES (continued) ● Please be aware that the contents of memory can be irretrievably lost as a result of a malfunction, or the improper operation of the unit. To protect yourself against the risk of loosing important data, we recommend that you have written down on paper (when possible). 553 554 ● Never strike or apply strong pressure to the display. 556 ● When disconnecting all cables, grasp the connector itself— never pull on the cable.
CD-2u_SD-2u_e.book 14 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Panel Descriptions Top Panel * The illustration depicts the CD-2u. MIC L/MIC R SD Card Slot This is a stereo pair of mics built into the CD-2u/SD2u. You can use these mics to record. You can insert an SD memory card here. ☞ “Recording with the Internal Mics” (Page 41) ☞ “Preparing an SD Memory Card” (Page 26) [ ] (Stop) Button [MIC] Knob This button stops playback or recording.
CD-2u_SD-2u_e.book 15 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Panel Descriptions (continued) ☞ “Adding Reverberation (Reverb)” (Page 73) ☞ “Listening to a Guide Tone While Tuning” (Page 85) This turns the power on/off. ☞ “Using the Dedicated AC Adaptor” (Page 22), ☞ “Using Batteries” (Page 24) Stereo Speakers These are a pair of stereo speakers built into the CD-2u/SD-2u. Metronome Indicator This will blink if the metronome is on.
CD-2u_SD-2u_e.book 16 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Panel Descriptions (continued) Display The display shows information or messages related to the operation you’re performing, such as when you’re making various settings or editing tracks. LEVEL Meter Phantom power indicator This indicates the volume level of the track that’s playing or the instrument or mic that’s being input. This indicates the phantom power on/off status.
CD-2u_SD-2u_e.book 17 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Panel Descriptions (continued) Left Side Panel Checking / Preparations fig.unit02-e.eps Recording [MIC LEVEL] Switch Connect external mics to these jacks. These XLR connectors can supply phantom power. This selects how the mic input level is to be adjusted. * This instrument is equipped with balanced (XLR/TRS) type jacks. Wiring diagrams for these jacks are shown below.
CD-2u_SD-2u_e.book 18 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Panel Descriptions (continued) Rear Panel/Bottom Panel fig.unit03.eps DC IN Connector Connect the dedicated AC adaptor (included) here. ☞ “Using the Dedicated AC Adaptor” (Page 22) Cord Hook Use this cord hook to fasten the cord of the dedicated AC adaptor (included) so that it doesn’t become accidentally unplugged. ☞ “Using the Dedicated AC Adaptor” (Page 22) Security Slot ( ) http://www.kensington.
CD-2u_SD-2u_e.book 19 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Panel Descriptions (continued) Remote Control Metronome settings Makes the metronome tempo faster. Checking / Preparations Makes the metronome tempo slower. Turns the metronome on/off. Recording Performs record/playback operations for the CD or SD memory card. These have the same function as the buttons on the CD-2u/SD-2u itself. Playback speed settings Center Cancel Makes the playback faster. Makes the playback slower.
CD-2u_SD-2u_e.book 20 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recordable Media and Functionality As its recording media, this device uses SD memory cards, and the CD-2u additionally allows you to use CD-R discs and CD-RW discs. The functions available for editing or deleting songs (tracks) after recording will differ according to the media you use. The table below shows the functions available for each type of media.
CD-2u_SD-2u_e.book 21 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recordable Media and Functionality (continued) Minimum Recording Time for One Track You must use the dedicated AC adaptor when recording on a CD-R/RW disc. ■ Maximum Recording Times If there is no more recordable time, the message “SD Card Full” or “CD Disc Full” will appear. ● If the maximum number of tracks have already been recorded, the message “SD Track Full” or “CD Track Full” will appear.
CD-2u_SD-2u_e.book 22 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Turning the Power On and Off You can operate the CD-2u/SD-2u either with the dedicated AC adaptor, six alkaline batteries (AA, LR6, sold separately), or rechargeable Ni-MH batteries (AA, HR6, sold separately). * Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound when switching the unit on/off. However, this is normal and does not indicate a malfunction.
CD-2u_SD-2u_e.book 23 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Turning the Power On and Off (continued) Turning the Power Off Press and hold the [POWER] switch until the shutdown screen appears in the display. * Do not disconnect the AC adaptor until the display backlight turns off. The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was last used for recording a performance, playing music, or its buttons or controls were operated (Auto Off function).
CD-2u_SD-2u_e.book 24 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Turning the Power On and Off (continued) Using Batteries Note If you’re operating the CD-2u/SD-2u on batteries, you won’t be able to perform CDrelated operations such as recording, playing, or writing songs, etc. * If operating this unit on batteries, please use alkaline batteries or rechargeable Ni-MH batteries. * If operating this unit on batteries, please disconnect the AC adaptor from this unit.
CD-2u_SD-2u_e.book 25 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Turning the Power On and Off (continued) Turning the Power Off Press and hold the [POWER] switch until the shutdown screen appears in the display. * Do not disconnect the AC adaptor until the display backlight turns off. If you’re operating the CD-2u/SD-2u on batteries, the battery indicator will be shown on the screen.
CD-2u_SD-2u_e.book 26 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Preparing an SD Memory Card Here’s how to prepare an SD memory card for recording. * The CD-2u and the SD-2u support SDHC cards (up to 16 GB). * Some SD memory card types or SD memory cards from some manufacturers may not record or play back properly on this unit. Inserting an SD Memory Card 1 Insert the SD memory card into the SD card slot on the CD-2u/SD-2u’s front panel. fig.SDcard01-e.
CD-2u_SD-2u_e.book 27 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Preparing an SD Memory Card (continued) In some cases when you insert an unused SD memory card that you purchased at a consumer electronic retailer, or an SD memory card that has been used with a computer or digital camera, the screen may indicate “Unknown Format. Format?” Note Never turn off the power or disconnect the SD cards, SDHC cards while the screen indicates “Processing...
CD-2u_SD-2u_e.book 28 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Preparing an SD Memory Card (continued) Removing an SD Memory Card Note Never insert or remove an SD memory card while this unit’s power is on. Doing so may corrupt the unit’s data or the SD memory card. 1 Turn the power off (☞ Page 23, 25). 2 Gently press the SD memory card inward, and then release your finger. When the memory card pops part of the way out, pull it all the way out.
CD-2u_SD-2u_e.book 29 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Preparing a CD Inserting a CD Don’t use CD labels, or CDs that have labels or stickers affixed to them. Doing so may make the CD impossible to remove, and may damage the unit. ● When opening/closing the CD-R/RW drive, please be careful not to get your fingers pinched between the movable part and the panel. In places where small children are present, make sure that an adult provides supervision and guidance. Press the [CD EJECT ( )] button.
CD-2u_SD-2u_e.book 30 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Preparing a CD (continued) Removing a CD 1 Press the [EJECT( )] button. After the CD has been ejected, pull it all the way out. fig.CD04.eps If the screen shows “Finalize Are You Sure?” fig.finalize-mssg01.eps If the CD-R/RW disc has not been finalized, a message will ask “Finalize Are You Sure?” If you don’t want to finalize the disc for playing on other CD players, press the [EXIT] button and remove the disc after it’s been ejected.
CD-2u_SD-2u_e.book 31 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Preparing the Remote Control Checking / Preparations When shipped from the factory, a coin-type lithium battery is installed in the remote control unit. To start using the remote control unit, simply pull out the insulating sheet that extends from the battery compartment. Replacing the Remote Control’s Battery Press here in the direction of the arrow while you pull out the holder.
CD-2u_SD-2u_e.book 32 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Preparing the Remote Control (continued) Using the Remote Control Point the remote control toward the CD-2u/SD-2u’s sensor, and operate it within the specified operating range. When the remote sensor detects a remote control operation, the [ENTER] button will blink. fig.remote02-e.eps * Even if the remote control is within range, it may not work if there is an obstruction between it and the remote sensor, or if the angle is excessive.
CD-2u_SD-2u_e.book 33 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Menu Operations You can also press the [Metronome], [KEY], [SPEED], or [CENTER CANCEL] button to access the specific menu screen for those functions. For details on each setting, refer to “List of Settings” on the following page. Press the [MENU] button to access the menu screen. Listening 1 fig.menu01-e.eps Category Use the [ ][ ] buttons to choose the item you wish to set.
CD-2u_SD-2u_e.book 34 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Menu Operations (continued) List of Settings * The default value (factory setting) is printed in bold characters. * The ✓ symbol in the “Battery” or “Playback” column indicates a setting that can be made while the CD-2u/SD2u is running on batteries or playing back. Values MIC Select (Selects either the built-in mics or the external mics.
CD-2u_SD-2u_e.book 35 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Menu Operations (continued) ✓ Page 87 — ✓ Page 103 — ✓ Page 88 — ✓ Page 90 — ✓ Page 104 — ✓ Page 106 — ✓ Page 107 -12–0–12 ✓ Page 108 -100–0–100 ✓ Page 109 50–100–200 ✓ Page 110 On1, On2, On3, Focus1, Focus2 ✓ Page 111 — Page 54 ✓ Page 59 — ✓ Page 119 — ✓ Page 113 CD Erase All? (Deletes all songs from the CD-RW disc.) — Page 93 Unfinalize? (Removes finalization from the CD-RW disc.
CD-2u_SD-2u_e.book 36 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Menu Operations (continued) Auto Off (Enables/disables automatic power-off when no panel operation has been performed for a specified length of time.
CD-2u_SD-2u_e.book 37 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 About Easy Guide 1 Press the [EASY GUIDE] button. Checking / Preparations Easy Guide is a convenient function that lets you operate the CD-2u/SD-2u simply by following the on-screen instructions without having to open the owner’s manual. fig.guide01-e.eps Recording Item Explanation of operation Use the [ ][ ] buttons to select the item for which you want to see an operation guide. Listening 2 fig.menu02.
CD-2u_SD-2u_e.book 38 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Setting Items in Easy Guide This section explains items that you can set in the screens appearing in Easy Guide. 1. Recording Record a vocal or instrumental performance to either an SD memory card (or a CD-R/RW disc Displayed screen ). Explanation Select the media to be used for recording. CD-R/RW Choose this if you’re recording on a CD-R/RW disc . SD Card Choose this if you’re recording on an SD memory card. Select what you want to record.
CD-2u_SD-2u_e.book 39 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Setting Items in Easy Guide (continued) 3. Write (SD→CD) Displayed screen Explanation Select whether or not the disc is to be finalized once writing is complete. When writing has been completed, the disc will be finalized to complete your music CD. No The disc will not be finalized when writing has been completed. Raise the volume of the entire song as high as possible without causing the sound to distort.
CD-2u_SD-2u_e.book 40 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Setting Items in Easy Guide (continued) 6. Overdub , 5. Overdub While playing back a previously recorded performance from an SD memory card, you can layer (or overdub) another vocal or instrumental performance and record the combined result to a new track. Displayed screen Explanation Select a song. Select what you want to record. Easy INT MIC Choose this if you’re making a test recording using the internal mics.
CD-2u_SD-2u_e.book 41 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals Checking / Preparations Recording with the Internal Mics ig.intmic-e.eps 1 3 If You’re Recording to a CD-R/RW Disc Turn on the power (☞ Page 22, 24). 1 Turn on the power (☞ Page 22). Insert the SD memory card 2 Insert the CD (☞ Page 29). (☞ Page 26). Set the audio source to “SD” Press the [SD CARD] button so it’s lit. fig.selectCD-e.eps .
CD-2u_SD-2u_e.book 42 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals (continued) 5 Select the internal mics. fig.menu-overdub-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “MIC Select.” Press the [ENTER] button to confirm your choice. Use the [+] [-] buttons to change the value to select “Internal.“ 6 Adjust the input level of the internal mics. On the CD-2u/SD-2u’s left side, set the [MIC LEVEL] switch to its “MANUAL” position.
CD-2u_SD-2u_e.book 43 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals (continued) 7 Press the [ ] (Record) button to enter recording-standby mode. fig.rec-intmic04-e.eps Press the [ ] (Play) button to begin recording. Start your performance. fig.rec-intmic05-e.eps Lit Recording 8 Remote control Checking / Preparations Blinking Remote control Listening 9 Press the [ ] (Stop) button to stop recording. fig.rec-intmic06-e.
CD-2u_SD-2u_e.book 44 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals (continued) Automatically Setting the Optimal Input Level from Your Rehearsal Performance (Rehearsal Function) Instead of adjusting the level by manually operating the [MIC] knob or [LINE] knob, you can use this function to have the optimal input level be set automatically while you rehearse the music before the actual performance to be recorded. “7. Rehearsal , 6.
CD-2u_SD-2u_e.book 45 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals (continued) Connecting the External Mics for Recording Checking / Preparations fig.extmic.eps Here’s how to record using the connected dynamic mics or stereo mic. * Dynamic mics are highly durable, and are suitable for recording instruments or vocals. They also have the advantage of not requiring a power supply.
CD-2u_SD-2u_e.book 46 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals (continued) 5 Select the External mics. fig.menu-overdub-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “MIC Select.” Press the [ENTER] button to confirm your choice. Use the [+] [-] buttons to choose “External,” “Ext(MONO),” or “Plug-In Power.” 6 Value Explanation External External mics connected to EXT MIC (L, R) are selected.
CD-2u_SD-2u_e.book 47 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals (continued) 7 Press the [ ] (Record) button to enter recording-standby mode. fig.rec-intmic04-e.eps Press the [ ] (Play) button to begin recording. Start your performance. fig.rec-intmic05-e.eps Lit Recording 8 Remote control Checking / Preparations Blinking Remote control Listening 9 Press the [ ] (Stop) button to stop recording. fig.rec-intmic06-e.
CD-2u_SD-2u_e.book 48 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals (continued) Selecting the External Mic Sensitivity You can set the sensitivity as appropriate for the external mic you’re using. 1 Press the [MENU] button to access the menu screen, and choose “EXT MIC Sens.” fig.menu-micsens02.eps Press the [MENU] button to access the menu screen. Use the [ Sens.” ][ ] buttons to choose “EXT MIC Press the [ENTER] button to confirm your choice.
CD-2u_SD-2u_e.book 49 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Acoustic Instruments or Vocals (continued) The EXT MIC (L, R) jacks can supply 48 V phantom power, allowing you to connect a condenser mic that requires phantom power. * Be sure to turn off the phantom power switch unless you’ve connected a mic that requires phantom power. Supplying phantom power to a dynamic mic or an audio playback device will cause malfunctions. Before use, please check the specifications of the mic you’re connecting.
CD-2u_SD-2u_e.book 50 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording an Electronic Instrument Here’s how to connect an electronic instrument such as a digital piano or keyboard, and record your performance. If you’re Recording to an SD Memory Card 1 2 3 If you’re Recording to a CD-R/RW Disc Turn on the power (☞ Page 22, 24). Insert the SD memory card (☞ Page 26). Set the audio source to “SD” . 1 2 Turn on the power (☞ Page 22). 3 Set the audio source to “CD.” Press the [SD CARD] button so it’s lit.
CD-2u_SD-2u_e.book 51 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording an Electronic Instrument (continued) 6 Press the [ ] (Record) button to enter recording-standby mode. fig.rec-intmic04-e.eps Press the [ Remote control Recording 7 Checking / Preparations Blinking ] (Play) button to begin recording. Start your performance. fig.rec-intmic05-e.eps Lit Remote control Listening 8 Press the [ ] (Stop) button to stop recording. fig.rec-intmic06-e.
CD-2u_SD-2u_e.book 52 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording a Cassette or Digital Audio Player Here’s how to record the sound from a cassette or Digital Audio Player. If You’re Recording to an SD Memory Card 1 2 3 If You’re Recording to a CD-R/RW Disc Turn on the power (☞ Page 22, 24). 1 Turn on the power (☞ Page 22). Insert the SD memory card 2 Insert the CD (☞ Page 29). 3 Set the audio source to “CD.” (☞ Page 26). Set the audio source to “SD” . Press the [SD CARD] button so it’s lit.
CD-2u_SD-2u_e.book 53 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording a Cassette or Digital Audio Player (continued) 6 Press the [ ] (Record) button to enter recording-standby mode. fig.rec-intmic04-e.eps Press the [ ] (Play) button to begin recording. Lit Play back your audio device (e.g., cassette deck). The song being played will be recorded. 9 Press the [ Listening 8 Remote control Recording 7 Remote control Checking / Preparations Blinking ] (Stop) button to stop recording. fig.
CD-2u_SD-2u_e.book 54 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Karaoke Here’s how the sound of the accompaniment and the sound of your voice being input via a mic can be recorded together to an SD memory card. As the accompaniment for your recording, you can use the sound being input to the LINE IN (L, R) jacks (e.g., from a digital audio player) (or the sound of a CD ). If Using Accompaniment from a CD * In order to perform this operation, you’ll need the included, dedicated AC adaptor.
CD-2u_SD-2u_e.book 55 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Karaoke (continued) 7 Adjust the CD’s playback level. * If sound from the speakers enters the mic, you won’t be able to adjust the level correctly. While adjusting the level, either turn the [VOLUME] knob all the way down or turn the speakers off, so no sound will be produced. Use headphones if you want to monitor the sound that’s being recorded.
CD-2u_SD-2u_e.book 56 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Karaoke (continued) 10 Press the [ ] (Play) button to begin recording. The song begins playing, and recording on the SD memory card begins simultaneously. Record your vocal or instrumental performance. fig.overdub-CD03-e.eps Lit During recording, the upper right of the screen will show “CD → SD.” Remote control When song stops, recording will also end automatically.
CD-2u_SD-2u_e.book 57 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Karaoke (continued) 5 Connect your mic to the EXT MIC (L, R) jacks or PLUG IN POWER MIC jack located on the CD-2u/SD-2u’s side panel. Checking / Preparations fig.connect-extmic-e.eps 6 Recording Types of plugs that can be connected Phone type, XLR type,TRS mini type (plug-in power mic) Select the External mics. fig.menu-overdub-e.eps Use the [ ][ ] buttons to choose “MIC Select.
CD-2u_SD-2u_e.book 58 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Recording Karaoke (continued) 10 Press the [ ] (Record) button to enter recording-standby mode. fig.rec-intmic04-e.eps Blinking 11 Press the [ Remote control ] (Play) button to begin recording. Lit Remote control 12 Play back your audio device (e.g., cassette deck). The song being played will be recorded. 13 Press the [ ] (Stop) button to stop recording. fig.rec-intmic06-e.
CD-2u_SD-2u_e.book 59 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Layering Your Performance onto an SD Memory Card Song and Recording It Since you can perform and overdub each part separately, this allows you to record your piano performance, and then sing along to add a vocal to your performance.
CD-2u_SD-2u_e.book 60 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Layering Your Performance onto an SD Memory Card Song and Recording It (continued) 5 Adjust the playback level of the SD memory card and the input level of the audio input. Adjust each level to obtain the appropriate volume balance between the SD memory card audio and the audio input. Press the [ Press the [ ] (Play) button to play back the SD memory card. ] or [ ] button to access the SD/CD Level or SD Level setting screen.
CD-2u_SD-2u_e.book 61 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Layering Your Performance onto an SD Memory Card Song and Recording It (continued) 7 Press the [ ] (Play) button to begin recording. fig.overdub-SD03.eps Lit During recording, the upper right of the screen will show “SD → SD.” Recording Remote control Listening 8 Checking / Preparations When the SD memory card song you selected in Step 4begins playing, recording on the SD memory card will begin simultaneously. Start your performance.
CD-2u_SD-2u_e.book 62 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Recording Automatically Starting Recording When Audio is Detected When the CD-2u/SD-2u is in recording-standby mode and it detects audio input that exceeds the specified level, recording will start automatically. 1 Press the [MENU] button to access the menu screen, and choose “Auto Rec Start.” fig.menu-autorec01-e.eps Press the [MENU] button to access the menu screen. Use the [ Start.
CD-2u_SD-2u_e.book 63 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Recording (continued) When you make settings for automatic recording, the procedure for starting to record will be as follows. Press the [ Checking / Preparations 1 ] (Record) button. fig.autorec01-e.eps Blinking Recording 2 Press the [ ] (Play) button. fig.autorec02-e.eps Blinking Start performing. Convenient Functions 3 Listening The CD-2u/SD-2u will be in recording-standby mode.
CD-2u_SD-2u_e.book 64 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Recording (continued) Assigning Song Numbers While Recording (Marker) During recording, you can assign a song number so that the subsequent material will be recorded as the next song. You can assign song numbers in the following three ways.
CD-2u_SD-2u_e.book 65 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Recording (continued) Automatically Assigning a Song Number at Fixed Intervals Specify how the song numbers will be assigned. fig.menu-automarker01-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Auto Marker.” Use the [+] [-] buttons to specify the desired “Time.” Explanation Off Song numbers will not be assigned automatically.
CD-2u_SD-2u_e.book 66 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Recording (continued) Assigning Track Numbers When Silence is Detected If a period of silence lasting longer than one second is detected during recording, recording will automatically pause. Then, when audio exceeding the specified level is subsequently detected, a song number will be assigned and recording will automatically resume.
CD-2u_SD-2u_e.book 67 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Recording (continued) Preventing Loud Sounds from Distorting (Limiter) 1 fig.menu-limiter01.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Limiter.” Use the [+] [-] buttons to turn the limiter on/off. Listening Press the [ENTER] button to confirm your choice. 2 Recording Press the [MENU] button to access the menu screen, and choose “Limiter.
CD-2u_SD-2u_e.book 68 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Recording (continued) Inserting a Count Before Recording Begins (Count-in) You can sound a count before recording begins. Hearing a count can help you practice the timing or tempo of your performance before you actually start recording. 1 Press the [ ] (Metronome) button to turn on the metronome. fig.countin01-e.eps Lit 2 Specify the sound, tempo, and time signature of the count.
CD-2u_SD-2u_e.book 69 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Recording (continued) If you’ve specified a count-in, the procedure for starting to record will be as follows. Press the [ ] (Record) button. The CD-2u/SD-2u will be in recording-standby mode. fig.autorec01-e.eps Checking / Preparations 1 Blinking Recording 2 Press the [ ] (Play) button. fig.countin02-e.eps Blinking Convenient Functions * The metronome will continue sounding even after recording begins.
CD-2u_SD-2u_e.book 70 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Listening to a CD/Listening to an SD Memory Card * In order to play a CD, you’ll need to use the dedicated AC adaptor, which was included with the CD-2u/ SD-2u. Listening to a CD Listening to an SD memory Card 1 2 Turn on the power (☞ Page 22). Insert the CD (☞ Page 29) 1 2 3 Set the audio source to “CD.” 3 Press the [CD] button so it’s lit. Turn on the power (☞ Page 22, 24). Insert the SD memory card (☞ Page 26).
CD-2u_SD-2u_e.book 71 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Listening to a CD/Listening to an SD Memory Card (continued) fig.tansport-remote-e.eps Remote operations Song cue, rewind/fast-forward Checking / Preparations Song stop/play (pause) Adjusting the volume Note Higher volume. Lower volume. 1 Press the [MENU] button to access the menu screen, and choose “Resume.” Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Resume.
CD-2u_SD-2u_e.book 72 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Playback Adjusting the Tone (Bass/Treble) Here’s how to adjust the tone of the playback sound to your taste. 1 Press the [MENU] button to access the menu screen, and choose “Bass” or “Treble.” fig.menu-key01-e.eps Press the [MENU] button to access the menu screen. Use the [ “Treble.” ][ ] buttons to choose “Bass” or Press the [ENTER] button to confirm your choice. 2 Use the [+] [-] buttons to change the tone setting. fig.
CD-2u_SD-2u_e.book 73 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Playback (continued) Adding Reverberation (Reverb) Press the [MENU] button to access the menu screen, and choose “Reverb.” fig.menu-key01-e.eps Recording 1 Checking / Preparations This function adds reverberation (reverb) to the audio played back from an SD memory card (or CD ), creating the impression that the performance is occurring in a concert hall or other real-world acoustic environment.
CD-2u_SD-2u_e.book 74 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Convenient Functions for Playback (continued) Muting the Sound of the Speakers If you don’t want sound to come from the speakers, press the [SPEAKER] button to turn them off. The speakers can be turned back on by pressing the button once again. fig.speaker.
CD-2u_SD-2u_e.book 75 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Changing the Key of the Playback Press the [KEY] button to access the menu screen, and choose “Key.” The setting will turn on/off each time you press the [KEY] button. Recording 1 Checking / Preparations This adjusts the key (pitch) of the playback sound in semitone steps. This can be useful in situations like the following. • You want to shift the key of an accompaniment that was created for alto sax, so that you can practice flute along with it.
CD-2u_SD-2u_e.book 76 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Making Fine Adjustments to the Playback Pitch (Pitch) This adjusts the pitch of the playback sound in one-cent steps. One cent is 1/100th of a semitone. Sometimes when you are practicing your instrument along with a CD, you may have difficulty because the CD playback is pitched slightly different than your instrument. In such cases, you can adjust the CD playback pitch to match your instrument.
CD-2u_SD-2u_e.book 77 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Slowing Down or Speeding Up Playback Press the [SPEED] button. The setting will turn on/off each time you press the [SPEED] button. * Whenever the unit has remained inactive for a predetermined amount of time, it will go back to displaying the Source (Sound Source) screen. Recording 1 Checking / Preparations You can make the playback speed slower or faster. You can also change the playback speed without affecting the pitch.
CD-2u_SD-2u_e.book 78 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Enjoying Simple Karaoke (Center Cancel) This function cancels the portion of the sound that is heard in the center of its stereo image, such as the main vocal or lead guitar, making it less audible. This lets you use a commercially available CD as a simple karaoke source, giving you an easy way to enjoy karaoke or to practice singing or playing an instrument. 1 Press the [CENTER CANCEL] button to access the “Center Cancel” screen.
CD-2u_SD-2u_e.book 79 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Repeatedly Playing Tracks (1 Track/All Repeat) 1 Press the [MENU] button to access the menu screen, and choose “Repeat.” Checking / Preparations You can have a favorite track (or all tracks) play back repeatedly. fig.menu-repeat01-e.eps Use the [ ][ ] buttons to choose “Repeat.” Recording Press the [MENU] button to access the menu screen. Press the [ENTER] button to confirm your choice.
CD-2u_SD-2u_e.book 80 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Repeatedly playing a portion of the song (A/B Repeat) You can have a specified section play back repeatedly. Repeatedly listening to a section of a song is convenient when you’re practicing your instrument along with the song, or learning the song by ear. 1 During playback, press the [REPEAT] button at the point where you want Repeat Play to start. The starting point (A) of A-B Repeat playback is registered, and the Point A icon blinks. fig.
CD-2u_SD-2u_e.book 81 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Sounding the Metronome 1 Press the [ ] (Metronome) button to turn the metronome on. The setting will turn on/off each time you press the[ ] (Metronome) button. fig.metro-indicator-e.eps Metronome indicator (blinking) 2 ] (Metronome) button once again, the metronome will turn off Setting the sound. ] (Metronome) button to access the Press the [ menu screen. Use the [ ] buttons to choose “Sound.
CD-2u_SD-2u_e.book 82 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Sounding the Metronome (continued) 4 Specifying which beats are emphasized. fig.menu-metro05-e.eps Use the [ ][ ] buttons to choose “Beat.” Use the [+] [-] buttons to specify the timing at which the metronome will mark the strong beats. Value Explanation 0 No beats are emphasized. 1 Every beat is emphasized. 2 Every second beat is emphasized. 3 Every third beat is emphasized. 4 (factory setting) Every fourth beat is emphasized.
CD-2u_SD-2u_e.book 83 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Tuning Your Instrument (Tuner Function) 1 Select the internal mics. Use the [ ][ ] buttons to choose “MIC Select.” Recording Press the [MENU] button to access the menu screen. Checking / Preparations You can tune your instrument using the chromatic tuner function, which detects the name of the note in semitone steps. fig.menu-overdub-e.eps Listening Press the [ENTER] button to confirm your choice.
CD-2u_SD-2u_e.book 84 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Tuning Your Instrument (Tuner Function) (continued) 5 Tune the instrument so that the left and right tuning guides are both displayed. When your instrument is within ±50 cents of the correct pitch, a tuning guide will appear in the screen. This indicates the distance between the displayed note name and the pitch your instrument is actually producing. fig.menu-tuner03-e.eps Tune your instrument so that the left and right guides are visible.
CD-2u_SD-2u_e.book 85 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Tuning Your Instrument (Tuner Function) (continued) 2 Use the [+] [-] buttons to adjust the reference pitch as desired. fig.menu-tuner06-e.eps Checking / Preparations Reference pitch Explanation 435–440 (factory setting)–445 Decreasing this value will lower the pitch. Increasing this value will raise the pitch. Recording 3 Value (units: Hz) Press the [EXIT] button twice.
CD-2u_SD-2u_e.book 86 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Deleting Songs from an SD Memory Card Deleting Songs Individually Here’s how to delete a single, selected song. When you delete a song, subsequent songs will be moved forward, incrementing their song numbers. Track 1 Number 3 B C C Blank Delete fig.SDedit-erase-e.eps Track 1 Number 1 2 A 2 A Insert the SD memory card that you want to edit, and press the [SD CARD] button . SD becomes the audio source.
CD-2u_SD-2u_e.book 87 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Deleting Songs from an SD Memory Card (continued) I Erasing All Tracks Insert the SD memory card that you want to edit. 2 Press the [MENU] button to access the menu screen, and choose “SD Erase All?” fig.menu-SDeraseall-e.eps Recording 1 Checking / Preparations Here’s how to delete all songs from the SD memory card. Press the [MENU] button to access the menu screen.
CD-2u_SD-2u_e.book 88 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Deleting Songs from an SD Memory Card (continued) Deleting an Unwanted Region at the Beginning of the Song (Trim In) If you start recording slightly ahead of the beginning of the performance so as to avoid missing anything, there will be some unwanted silence at the beginning of the song. You can delete this unwanted silence so that you will hear sound as soon as the song starts playing.
CD-2u_SD-2u_e.book 89 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Deleting Songs from an SD Memory Card (continued) Press the [ENTER] button. 8 If you’re sure you want to proceed, press the [ENTER] button. (Note that the process cannot be interrupted once you’ve started it. If you decide that you don’t want to begin the process, press the [EXIT] button.) Checking / Preparations 7 fig.trimin-mssg-e.eps Recording Progress indication The deleted region cannot be recovered. Use this operation with caution.
CD-2u_SD-2u_e.book 90 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Deleting Songs from an SD Memory Card (continued) Deleting an Unwanted Region at the End of the Song (Trim Out) If you stop recording slightly after the end of the performance so as to avoid missing anything, there will be some unwanted silence at the end of the song. You can delete this unwanted silence so that the song contains only the performance itself. 1 Insert the SD memory card that you want to edit, and press the [SD CARD] button .
CD-2u_SD-2u_e.book 91 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Deleting Songs from an SD Memory Card (continued) Press the [ENTER] button. 8 If you’re sure you want to proceed, press the [ENTER] button. (Note that the process cannot be interrupted once you’ve started it. If you decide that you don’t want to begin the process, press the [EXIT] button.) Checking / Preparations 7 fig.trimout-mssg-e.eps Recording Progress indication The deleted region cannot be recovered. Use this operation with caution.
CD-2u_SD-2u_e.book 92 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Erasing Tracks from a CD-RW Disc Deleting One Song at a Time (Only the Last Song) Here’s how to erase the last track recorded on a CD-RW disc. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. 1 Insert the CD-RW disc that you want to edit. 2 Press the [MENU] button to access the menu screen, and choose “Erase Last?” fig.menu-RWerase-e.eps Press the [MENU] button to access the menu screen.
CD-2u_SD-2u_e.book 93 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Erasing Tracks from a CD-RW Disc (continued) Erasing All Tracks * In order to perform this operation, you’ll need the included, dedicated AC adaptor. Insert the CD-RW disc that you want to edit. 2 Press the [MENU] button to access the menu screen, and choose “CD Erase All?” Recording 1 Checking / Preparations Here’s how to erase all tracks from the CD-RW disc. fig.menu-RWeraseall-e.eps Press the [MENU] button to access the menu screen.
CD-2u_SD-2u_e.book 94 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Erasing Tracks from a CD-RW Disc (continued) Removing Finalization You can remove finalization from a CD-RW disc (Page 99) so that the disc can once again be used for recording. Removing finalization will not erase the recorded tracks. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. 1 Insert the CD-RW disc that you want to edit, and press the [CD] button. CD becomes the audio source.
CD-2u_SD-2u_e.book 95 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Selecting Songs from an SD Memory Card to Create a CD * In order to perform this operation, you’ll need the included, dedicated AC adaptor. Insert the SD memory card that contains the songs you want to turn into a music CD. 2 Press the [MENU] button to access the menu screen, and choose “Write (SD→CD)?” Use the [ ][ (SD→CD)?” ] buttons to choose “Write Listening Press the [MENU] button to access the menu screen.
CD-2u_SD-2u_e.book 96 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Selecting Songs from an SD Memory Card to Create a CD (continued) 7 If you’re sure you want to proceed, press the [ENTER] button. (Note that the process cannot be interrupted once you’ve started it. If you decide that you don’t want to begin the process, press the [EXIT] button.) fig.writeCD-mssg03-e.eps 8 Use the [+] [-] buttons to specify the Finalize setting. * For details on “Finalize,” refer to the text box “What’s finalization?” on Page 99. fig.
CD-2u_SD-2u_e.book 97 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Selecting Songs from an SD Memory Card to Create a CD (continued) 10 The CD-2u/SD-2u asks whether you want to create another identical CD. fig.writeCD-mssg06-e.eps Checking / Preparations If you want to create another identical CD When you see this screen, insert a blank or un-finalized CD-R/RW disc. fig.writeCD-mssg01.eps You’re returned to the audio source screen. Recording Press the [EXIT] button to end the procedure. Press the [ENTER] button.
CD-2u_SD-2u_e.book 98 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Selecting Songs from an SD Memory Card to Create a CD (continued) Making a music CD from a song recorded on a device such as the Roland R05/R-09 series “WAV 16-bit” and “44.1 kHz” is supported If you want to create a music CD using songs that were recorded on an R-09, you must set the R-09’s recording mode to “WAV 16-bit” and sampling frequency to “44.1 kHz” before you record.
CD-2u_SD-2u_e.book 99 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Making a CD-R/RW Disc for Playback on Another CD Player (Finalize) * In order to perform this operation, you’ll need the included, dedicated AC adaptor. Insert the CD-R/RW disc that you want to finalize. 2 Press the [EJECT ( Convenient Functions 1 Listening After finalization, it will no longer be possible to record or write additional material to that disc.
CD-2u_SD-2u_e.book 100 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Creating a Duplicate of an Original Music CD (Backup) Here’s how to back up an original music CD you created, making an identical copy of your original music CD. * In order to perform this operation, you’ll need the included, dedicated AC adaptor. Workflow to Back up CDs When copying a music CD, the CD tracks are stored temporarily on an SD memory card. The temporary tracks on the SD memory card are written to a blank CD-R/RW disc.
CD-2u_SD-2u_e.book 101 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Creating a Duplicate of an Original Music CD (Backup) (continued) 4 When you see this screen, insert a blank CD-R/RW disc. fig.CDbackup-mssg02-e.eps Checking / Preparations 5 If you’re sure you want to proceed, press the [ENTER] button. fig.CDbackup-mssg03-e.eps 6 The CD-2u/SD-2u asks whether you want to create another identical CD. Convenient Functions The display will show “Processing..,” and the backup will begin.
CD-2u_SD-2u_e.book 102 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Creating a Duplicate of an Original Music CD (Backup) (continued) If the screen shows “Tr ##/xx Tr. Are You Sure?” (Step 3) The music CD’s tracks will be written as far as the free space on the SD memory card allows. This means that if the SD memory card contains less free space than the amount of data from the music CD, you won’t be able to record all of the tracks. In this case, the message “Copy ##/xx Tr. Are You Sure?” will appear.
CD-2u_SD-2u_e.book 103 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Moving a Song 2 3 Track 1 Number A B C fig.SDedit-move-e.eps Move Track 1 Number A 3 C B Insert the SD memory card that you want to edit, and press the [SD CARD] button . Recording 1 2 Checking / Preparations This operation moves a song by changing the order of the songs. SD becomes the audio source. Use the [ 3 Press the [MENU] button to access the menu screen, and choose “Move?” ][ ] buttons to select the song that you want to move.
CD-2u_SD-2u_e.book 104 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Dividing a Track This operation divides a song into two songs. Track 1 Number 2 A B Divide 3 2 Track 1 Number A A” 1 B Insert the SD memory card that you want to edit, and press the [SD CARD] button . SD becomes the audio source. 2 Use the [ 3 Press the [MENU] button to access the menu screen, and choose “Divide?” ] or [ ] button to select the track you want to edit. fig.menu-divide01-e.
CD-2u_SD-2u_e.book 105 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Dividing a Track (continued) 8 If you’re sure you want to proceed, press the [ENTER] button. fig.divide-mssg-e.eps Recording Progress indication Checking / Preparations (Note that the process cannot be interrupted once you’ve started it. If you decide that you don’t want to begin the process, press the [EXIT] button.) The display will show “Processing..,” and the song will be divided.
CD-2u_SD-2u_e.book 106 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Joining Songs This operation join two songs, making them into a single song. The song will be joined with the following song. fig.SDedit-combine-e.eps 2 3 Track 1 Number A B C Join 2 Track 1 Number A 1 B+C Insert the SD memory card that you want to edit, and press the [SD CARD] button . SD becomes the audio source. 2 Use the [ ][ ] buttons to select the song you want to join. This song will be joined with the song that follows it.
CD-2u_SD-2u_e.book 107 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Maximizing the Volume of a Song 1 SD becomes the audio source. 2 Use the [ 3 Press the [MENU] button to access the menu screen, and choose “Normalize?” ] or [ Recording Insert the SD memory card that you want to edit, and press the [SD CARD] button . Checking / Preparations This operation raises the volume of the entire song as high as possible without causing the sound to distort.
CD-2u_SD-2u_e.book 108 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Creating a Copy of a Song in a New Key You can change the key of a song on an SD memory card (or CD the new version of the song on the SD memory card. ), and save * In order to edit a song on CD, you’ll need to use the dedicated AC adaptor (included) 1 . Insert the media that contains the song you want to edit. * The copy of the song in the new key will be created on the SD memory card.
CD-2u_SD-2u_e.book 109 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Creating a Copy of a Song in a New Pitch ), and save * In order to edit a song on CD, you’ll need to use the dedicated AC adaptor (included) 1 . Insert the media that contains the song you want to edit. a song that’s on a CD, you’ll need to provide both the CD and the SD memory card . Select the song whose pitch you want to change. Press the [MENU] button to access the menu screen.
CD-2u_SD-2u_e.book 110 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Creating a Copy of a Song at a New Playback Speed You can change the playback speed of a song on an SD memory card (or a CD ), and save the new version of the song on the SD memory card. * In order to edit a song on CD, you’ll need to use the dedicated AC adaptor (included) 1 . Insert the media that contains the song you want to edit. * The song with the new playback speed will be created on the SD memory card.
CD-2u_SD-2u_e.book 111 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Creating a Copy of a Song with the Center Cancelled * In order to edit a song on CD, you’ll need to use the dedicated AC adaptor (included) Insert the media that contains the song you want to edit. * A copy of the song, to which the center cancel effect has been applied, will be created on the SD memory card.
CD-2u_SD-2u_e.book 112 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Viewing the Remaining Recording/Playback Time Here’s how to switch the time information shown in the screen. You can view the remaining time that can be recorded on an SD memory card (or CD-R/RW disc remaining in a song. ), or the time fig.display-e.eps Press the [ENTER] button to switch between the available choices for the time indicator, as follows. During recording or recording standby fig.remain01-e.
CD-2u_SD-2u_e.book 113 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Viewing Information about an SD Memory Card 1 Press the [MENU] button to access the menu screen, and choose “Card Info.” Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Card Info.” Recording fig.menu-SDinfo01-e.eps Checking / Preparations Here’s how to view information such as the capacity of an SD memory card and the remaining time for recording. Press the [ENTER] button to confirm your choice.
CD-2u_SD-2u_e.book 114 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Viewing Information about a CD-R/RW Disc Here’s how to view information such as the capacity of a CD-R/RW disc and the remaining time for recording. 1 Press the [MENU] button to access the menu screen, and choose “Disc Info.” fig.menu-CDinfo01-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Disc Info.” Press the [ENTER] button to confirm your choice. 2 View the information. fig.menu-CDinfo02-e.
CD-2u_SD-2u_e.book 115 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Adjusting the Readability of the Screen (Contrast) 1 Press the [MENU] button to access the menu screen, and choose “Contrast.” Press the [MENU] button to access the menu screen. Use the [ ][ ] buttons to choose “Contrast.” Recording fig.menu-contrast01-e.eps Checking / Preparations Depending on the temperature or other conditions, the characters in the screen may become difficult to read.
CD-2u_SD-2u_e.book 116 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Automatically Dimming the Screen (Backlight Timer) If you’re operating the CD-2u/SD-2u on batteries (Page 24), you can set this function so that the screen will automatically be dimmed to conserve batteries after no operation has been performed for a certain length of time. * This setting is effective only when the CD-2u/SD-2u is running on batteries. The screen will not dim if you’re using the dedicated AC adaptor (Page 22).
CD-2u_SD-2u_e.book 117 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Changing the Screen Display Language Turn off the power. 2 Refer to the table below, and while holding down the button that corresponds to the desired screen display language, turn on the power. For example, if you want to set the screen display language to “Spanish,” hold down the [KEY] button and turn on the power. When the screen appears, release the button.
CD-2u_SD-2u_e.book 118 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Returning the Menu Settings to their Factory-Set Condition (Factory Reset) This operation returns all settings you’ve made in the menus to their factory-set condition (Factory Reset). If the CD-2u/SD-2u does not operate as you expect even when you follow the steps in this manual, you may wish to execute the Initialize operation. 1 Press the [MENU] button to access the menu screen, and choose “Factory Reset?” fig.menu-reset-e.
CD-2u_SD-2u_e.book 119 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Formatting an SD Memory Card ● Never turn off the power or disconnect the SD cards or SDHC cards while the screen indicates “Processing...” ● When you format an SD memory card, all data stored on that card will be erased. Content lost in this way cannot be recovered. Please use this operation with caution. Listening Insert the SD memory card that you want to format. 2 Press the [MENU] button to access the menu screen, and choose “Format?” fig.
CD-2u_SD-2u_e.book 120 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Adjusting the Left/Right Volume Balance of the Internal Mics When recording via the internal mics (Page 41), the recorded sound may not be even in volume between the left and right sides, depending on where the CD-2u/SD-2u is located. In such cases, you can adjust the left/right volume balance of the internal mics to compensate for the position in which the CD-2u/SD-2u is placed. 1 Select the internal mics.
CD-2u_SD-2u_e.book 121 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Reversing the Stereo Field of the Internal Mics In such cases, you can exchange the left and right channels of the internal mics. This way, the performance will be recorded just as you heard it.
CD-2u_SD-2u_e.book 122 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Reversing the Stereo Field of the Internal Mics (continued) Here’s how to exchange the right and left channels of the internal mics. 1 Press the [MENU] button to access the menu screen, and choose “INT MIC Exchange.” fig.menu-format-e.eps Press the [MENU] button to access the menu screen. Use the [ ][ Exchange.” ] buttons to choose “INT MIC Press the [ENTER] button to confirm your choice.
CD-2u_SD-2u_e.book 123 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Connecting External Speakers Once everything is properly connected, be sure to follow the procedure below to turn on their power. If you turn on equipment in the wrong order, you risk causing malfunction or equipment failure. ● To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections. Listening 1 ● Turn off the power of the CD-2u/SD-2u.
CD-2u_SD-2u_e.book 124 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Connecting External Speakers (continued) Selecting the Audio Source that’s Sent from the LINE OUT Jack You can choose the audio source that is output from the LINE OUT jack. 1 Press the [MENU] button to access the menu screen, and choose “OUTPUT Select.” fig.menu-format-e.eps Press the [MENU] button to access the menu screen. Use the [ Select.” ][ ] buttons to choose “OUTPUT Press the [ENTER] button to confirm your choice.
CD-2u_SD-2u_e.book 125 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Troubleshooting Checking / Preparations If you suspect a malfunction, please check the following points. If this does not resolve the problem, contact a nearby Roland distributor. Power Supply Cause and Action See Page ● Could you be using an AC adaptor other than the included one? ➔ Use included dedicated AC adaptor. 22 22 25 Convenient Functions ➔ Once the battery runs low, the power may not turn on. Install fresh batteries.
CD-2u_SD-2u_e.book 126 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Troubleshooting (continued) Problems with the Sound Problem Cause and Action See Page ● Could the connections be incorrect? ➔ Make the correct connections. 45, 50, 52 ● Could the power on the connected equipment (mic, digital piano, etc.) be switched off? ➔ Turn on the power. — ● Could the volume of the connected device be turned down? ➔ Raise the volume of the connected device.
CD-2u_SD-2u_e.book 127 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Troubleshooting (continued) Problems with the Sound (continued) See Page ● Have you adjusted the input level of the internal mics? ➔ Turn the [MIC] knob to raise the input level of the internal mics. 42, 46, 50, 52 Convenient Functions Use batteries to power the unit. (24) Listening ● Is the input level adjusted appropriately? ➔ Noise can tend to be become more noticeable if the sound being input is at a relatively low level.
CD-2u_SD-2u_e.book 128 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Troubleshooting (continued) CD-Related Problems Can’t insert a CD See Page Cause and Action Problem ● Could you be using batteries? If you’re operating the CD-2u/SD-2u on batteries, no CD-related operations can be performed. ➔ Use the dedicated AC adaptor. 22 ● Is the audio source set to “CD”? ➔ Press the [CD] button to choose “CD” as the audio source. 70 ● Could the CD be upside down? ➔ Insert the CD with the label facing upward.
CD-2u_SD-2u_e.book 129 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Troubleshooting (continued) CD-Related Problems (continued) Cause and Action See Page Checking / Preparations Problem ● Could the CD be upside down? 29 ● Could you be attempting to record on a CD-R/RW disc that has already been finalized? — 94 Listening Can’t record ➔ Use a blank or un-finalized CD-R/RW disc.
CD-2u_SD-2u_e.book 130 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Troubleshooting (continued) SD Memory Card-Related Problems Problem See Page Cause and Action ● Could the SD memory card be of a capacity that is not supported? ➔ Check the capacity of the SD memory card, and use a card of a capacity supported by the CD-2u/SD-2u.
CD-2u_SD-2u_e.book 131 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Troubleshooting (continued) SD Memory Card-Related Problems (continued) See Page ● Could the SD memory card playback level be turned down? ➔ Use SD/CD Level to raise the playback level. 60 ● Is the SD memory card inserted all the way into the slot? ➔ Make sure that the card is oriented correctly, and that it’s pushed all the way into the slot. 26 ➔ You can’t record for less than four seconds.
CD-2u_SD-2u_e.book 132 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Messages If a message is displayed, refer to the following list and take the appropriate action. Messages for which the upper line of the screen shows “-- ERROR!--” will disappear when you press the [ENTER] button. Message Action Battery Low The batteries are running low. Install fresh batteries as soon as possible. Blank Disc The CD-R/RW disc is blank (empty). Use a CD-R/RW disc that isn’t blank.
CD-2u_SD-2u_e.book 133 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Messages (continued) Message Content Action Preparations for playback are being made. Please wait. — Power Down The batteries are depleted. The CD-2u/SD-2u cannot be operated. Please install fresh batteries. Each recording must be longer than four seconds. REC Too Short You can’t stop recording because the elapsed recording time has not reached four seconds.
CD-2u_SD-2u_e.book 134 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Specifications CD-2u Tracks Sampling Rate Signal Processing Recording Mode Recording Media Recording Time (unit: min) Recorder Part 2 (Stereo) 44.1 kHz AD/DA conversion: 24 bits SD Memory Card: WAV (44.1 kHz, 16 bits) CD-R, CD-RW: Audio CD SD Memory Card (supports 512 MB–16 GB, SDHC format compatible) CD-R, CD-RW SD-2u SD Memory Card: WAV (44.
CD-2u_SD-2u_e.book 135 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Index I Advanced Uses Appendices Information CD-R/RW disc ......................................... 114 SD memory card ..................................... 113 Input Level External mics ............................................ 46 Internal mics ............................................. 42 LINE IN jacks ................................. 50, 52, 56 Inserting CD ............................................................ 29 SD memory card ......
CD-2u_SD-2u_e.book 136 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Index (continued) INT MIC Exchange ....................................... 122 Internal mics reversing the stereo field ......................... 121 volume balance ...................................... 120 K Karaoke ......................................................... 54 Key ................................................................ 75 L Language .................................................... 117 Limiter ............................
CD-2u_SD-2u_e.book 137 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 Index (continued) Unfinalize? ..................................................... 94 Recording U Checking / Preparations Track numbers ................................... 64, 65, 66 Trim In ........................................................... 88 Trim Out ........................................................ 90 Tuner ............................................................. 83 Tuner/Tone? ..............................................
CD-2u_SD-2u_e.
CD-2u_SD-2u_e.book 139 ページ ２０１３年１月２４日 木曜日 午前１１時３４分 For EU Countries CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Apparatus containing Lithium batteries ADVARSEL! VARNING Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type.
CD-2u_SD-2u_e.
