User Manual

106
Joining Songs
This operation join two songs, making them into a single
song. The song will be joined with the following song.
fig.SDedit-combine-e.eps
1
Insert the SD memory card that you want to edit, and press the
[SD CARD] button .
SD becomes the audio source.
2
Use the [ ] [ ] buttons to select the song you want to join.
This song will be joined with the song that follows it.
3
Press the [MENU] button to access the menu screen, and choose
“Combine?”
fig.menu-combine-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Combine?”
Press the [ENTER] button to confirm your choice.
4
If you’re sure you want to proceed, press the [ENTER] button.
(Note that the process cannot be interrupted once you’ve started it. If you decide that
you don’t want to begin the process, press the [EXIT] button.)
fig.combine-mssg-e.eps
The display will show “Processing..,” and the songs will be joined.
When the operation is completed, you’re returned to the audio source screen.
A B C
123
Join
A
12
B + C
Track
Number
Track
Number
Progress indication
●
This editing process will take a certain amount of time. The time required for this operation
will be approximately half the playback time of two songs you’re joining. For example, if
you’re joining a five-minute song and a three-minute song, processing will take
approximately four minutes.
●
Joining two songs will require free space equal to the size of the two songs being joined.
For example, if you’re joining a five-minute song and a three-minute song, you won’t be
able to execute this operation unless you have at least eight minutes of recording time
remaining.
●
This operation cannot be performed if the SD memory card’s write protect switch (Page
26) is in the “LOCK” position.
Important
CD-2u_SD-2u_e.book 106 ページ ２０１３年１月２４日 木曜日 午前１１時３４分