User Manual

118
Returning the Menu Settings to their Factory-Set
Condition (Factory Reset)
This operation returns all settings you’ve made in the menus to their factory-set condition
(Factory Reset).
If the CD-2u/SD-2u does not operate as you expect even when you follow the steps in this
manual, you may wish to execute the Initialize operation.
1
Press the [MENU] button to access the menu screen, and choose “Factory
Reset?”
fig.menu-reset-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Factory
Reset?”
Press the [ENTER] button to confirm your choice.
2
If you’re sure you want to proceed, press the [ENTER] button.
(Note that the process cannot be interrupted once you’ve started it. If you decide that
you don’t want to begin the process, press the [EXIT] button.)
fig.reset-mssg-e.eps
The display will show “Processing..,” and the factory reset will be executed.
When the factory reset is completed, you’re returned to the audio source screen.
For the default value of each setting, refer to “List of Settings” on Page 34.
Important
CD-2u_SD-2u_e.book 118 ページ ２０１３年１月２４日 木曜日 午前１１時３４分