User Manual

123
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
Connecting External Speakers
You can connect external speakers with built -in amplifier to the LINE OUT jack and use them
to listen to playback from the CD-2u/SD-2u or the sound received at its inputs. If you connect
the LINE OUT jack to the input jack of your digital piano, you’ll be able to listen to the sound
using the built-in speakers of your digital piano.
1
Turn off the power of the CD-2u/SD-2u.
* To prevent acoustic feedback, set the [MIC LEVEL] switch to the “MANUAL” position, and then
turn the [MIC] knob all the way to the left so that it’s off.
2
Minimize the volume of the external speakers (or digital piano) you’ll be
connecting, and turn off the power.
3
Connect the CD-2u/SD-2u’s left side panel LINE OUT jack to your external
speakers (or digital piano).
fig.connect-lineout-e.eps
4
Turn on the power of the CD-2u/SD-2u.
5
Turn on the power of your external speakers (or digital piano).
6
Turn the [VOLUME] knob to adjust the output level of the LINE OUT jack.
Adjust the volume of your external speakers (or digital piano).
●
Once everything is properly connected, be sure to follow the procedure below to turn on
their power. If you turn on equipment in the wrong order, you risk causing malfunction or
equipment failure.
●
To prevent malfunction and equipment failure, always turn down the volume, and turn off
all the units before making any connections.
Note
LINE OUT
L R
To the input jacks of
your external speakers
Type of plug that can
be connected
RCA phono type
RL
●
You can use external speakers that have a built-in amplifier.
●
Howling could be produced depending on the location of microphones relative to
speakers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
Important
CD-2u_SD-2u_e.book 123 ページ ２０１３年１月２４日 木曜日 午前１１時３４分