User Manual

14
Panel Descriptions
* The illustration depicts the CD-2u.
MIC L/MIC R
This is a stereo pair of mics built into the CD-2u/SD-
2u. You can use these mics to record.
☞
“Recording with the Internal Mics” (Page 41)
[MIC] Knob
This adjusts the input level of the internal mics and
the EXT MIC (L, R) jacks.
fig.mic-peak.eps
If the input sound is too loud, the PEAK
indicator above the [MIC] knob will light.
* If you turn the [MIC] knob all the way to the left, no
sound will be input from the internal mics or the EXT
MIC (L, R) jacks.
* If the [MIC LEVEL] switch is in the “AUTO” position
(Page 44), the input level will be set automatically, and
you won’t be able to adjust the input level using the
[MIC] knob.
☞
“Recording with the Internal Mics” (Page 41),
“Connecting the External Mics for Recording” (Page
45)
[LINE] Knob
This adjusts the input level of the LINE IN (L, R)
jacks.
fig.mic-peak.eps
If the input sound is too loud, the PEAK
indicator above the [LINE] knob will light.
* If you turn the [LINE] knob all the way to the left, no
sound will be input from the LINE IN (L, R) jacks.
☞
“Recording an Electronic Instrument” (Page 50),
“Recording a Cassette or Digital Audio Player” (Page
52)
[VOLUME] Knob
This knob adjusts the volume of the internal
speakers and the headphones.
☞ “Listening to a CD/Listening to an SD Memory Card”
(Page 70)
SD Card Slot
You can insert an SD memory card here.
☞
“Preparing an SD Memory Card” (Page 26)
[ ] (Stop) Button
This button stops playback or recording.
☞
“Listening to a CD/Listening to an SD Memory Card”
(Page 70)
[ ] (Play) Button
●
This button starts playback or recording.
●
During playback or recording, you can press this
button to pause. Press it once again to resume
playback or recording from the location at which
you paused.
●
If you pause recording, the next track will be
started at the point you resumed recording.
☞
“Listening to a CD/Listening to an SD Memory Card”
(Page 70)
[ ] (Record) Button
●
Press this button to enter recording-standby
mode.
●
During recording, you can press this button to
assign a track number.
☞ “Press the [ ] (Record) button to Assign a Song
number” (Page 64)
MODE Button
These buttons select the audio source. The selected
button will light.
[EJECT ] Button
Press this to eject the CD.
☞
“Removing a CD” (Page 30)
Top Panel
[SD CARD]
button
Selects “SD memory card” as the audio
source.
[CD] button Selects “CD” as the audio source.
CD-2u_SD-2u_e.book 14 ページ ２０１３年１月２４日 木曜日 午前１１時３４分