User Manual

Preparing an SD Memory Card
(continued)
27
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
In some cases when you insert an unused SD memory card that you purchased at a
consumer electronic retailer, or an SD memory card that has been used with a computer
or digital camera, the screen may indicate “Unknown Format. Format?”
In order to use this SD memory card with the CD-2u/SD-2u, you’ll need to format the
card. Proceed as follows to format the card.
1 To begin formatting, press the [ENTER] button.
fig.SDcard05.eps
2 If you’re sure you want to proceed, press the [ENTER] button.
(Note that the process cannot be interrupted once you’ve started it. If you decide that
you don’t want to begin the process, press the [EXIT] button.)
fig.SDcard06.eps
The screen will indicate “Processing..,” and the card will be formatted. When formatting
is completed, you’re returned to the audio source screen.
You can use the included SD memory card protector to prevent theft of an SD memory
card inserted in the CD-2u/SD-2u.
*
*
*
Remove the screw from the bottom panel.
Use the removed screw to attach the protector.
* When fastening the screw, take care not to overtighten it. Doing so may strip the threads or the
head of the screw.
* Take care not to lose the screw.
* Keep the removed screw out of the reach of small children so that it will not be swallowed
accidentally.
If the screen indicates “Unknown Format”
Using the Included SD Memory Card Protector
●
Never turn off the power or disconnect the SD cards, SDHC cards while the screen indicates
“Processing...”
●
When you format an SD memory card, any data that was on that card will be erased. Data
that’s been lost in this way cannot be recovered. Please make sure that you really want to
format the card.
Note
Bottom
Panel
CD-2u_SD-2u_e.book 27 ページ ２０１３年１月２４日 木曜日 午前１１時３４分