User Manual

70
Listening to a CD/Listening to an SD Memory Card
* In order to play a CD, you’ll need to use the dedicated AC adaptor, which was included with the CD-2u/
SD-2u.
4
Press the [ ] (Play) button to start playback.
5
Turn the [VOLUME] knob to adjust the volume.
Listening to a CD Listening to an SD memory Card
1 Turn on the power ( ☞ Page 22). 1 Turn on the power ( ☞ Page 22, 24) .
2
Insert the CD ( ☞ Page 29)
2
Insert the SD memory card
( ☞ Page 26).
3 Set the audio source to “CD.”
Press the [CD] button so it’s lit.
fig.selectCD-e.eps
3 Set the audio source to “SD” .
Press the [SD CARD] button so it’s lit.
fig.selectSD-e.eps
To do this
Perform this action
Stop playback
Press the [ ] (Stop) button.
If you press this button while stopped, you will return to the first track.
Pause playback
Press the [ ] (Play) button.
Press it once again to resume playback from the point at which you
paused.
Go to the beginning
of a track (Skip)
Press the [ ] button.
Each time you press this button, you go back by one track. If you press
this button during playback, you will return to the beginning of the
track that was playing.
Press the [ ] button.
Each time you press this button, you advance to the next track.
Skip between songs at
high-speed
While stopped, press and hold the [ ] or [ ] button.
Rewind/
fast-forward (Search)
During playback, press and hold.
[ ] button: Rewind.
[ ] button: Fast-forward.
High-speed rewind/
fast-forward
While paused, press and hold the [ ] or [ ] button.
Currently playing
track number
Source name Elapsed playback time
Softer Louder
If you don’t need the mic or LINE input, you should
turn down the input level to the minimum position.
Mic input Set the [MIC LEVEL] switch to the
“MANUAL” position, and turn the [MIC] knob all the
way to the left (off).
LINE input Turn the [LINE] knob all the way to the
left (off).
CD-2u_SD-2u_e.book 70 ページ ２０１３年１月２４日 木曜日 午前１１時３４分