Specifications

45
4-8 The Memory Feature
With this machine, you can set and store eight types of cutting conditions for different tools and materials. You can call up the
settings simply by using the [MEMORY] key.
To Store in Memory
2
Press the [MENU] key several times until the screen
shown in the figure appears.
3
4
5
Press the [ ] key.
Use the [
] and [ ] keys to select the user number
for the conditions you want to store in memory.
6
Press the [ENTER] key to enable the setting.
Press the [MENU] key to go back to the screen shown
in the figure.
1
Use the display menu to make the settings for cutting conditions matched to the tool and material in use. You can set the
following five types of parameters.
Blade force : [FORCE] key
Offset : Menu mode [OFFSET]
Cutting speed : [SPEED] key
Cutting quality : Menu mode [QUALITY]
Up speed : Menu mode [UPSPEED]
Storing is now completed. When you store to a user number, any cutting conditions already stored to the number are automatically
updated (overwritten) with the newly set parameters. If you want to keep the previous cutting conditions, store them to a different
number. You can store up to eight types of cutting conditions using the steps described above.
Press the [
] key.
Press the [
] key.
Press the [
] key.
UNSETUP
MEMORY
<USER1>
SAVE USER1
SAVE *USER1
20-50-0.250
20cm/s
50gf 0.250mm A