Specifications

Menu Function Range Default

OVER This cuts an excess margin of 1 mm (0.04 in.) from the DISABLE/ENABLE DISABLE

CUT first and last line segments.

This selection is normally set to [DISABLE], and is set

to [ENABLE] when cutting especially attractive corners

is desired. When cutting small text or intricate

graphics, however, this should be set to [DISABLE] to

avoid cutting the text or graphics portion of material.

CALIB This adjusts the respective distances of the X axis and -2.00 to 2.00 % 0.00 %

Y axis. Compare the actual measurements of the (0.01 % step)

cutting results with the data sent from the computer to

calculate and set the distance adjustment value.

REPLOT [START] - -

Performs cutting using the data in the replot memory.

[CLEAR]

Deletes the data in the replot memory.

MEMORY This stores the cutting conditions to match the blade USER1 ~ 8 -

and material in use. You can set the following five types

of parameters: [SPEED], [OFFSET], [FORCE],

[UPSPEED] and [QUALITY]. These settings can be

stored in memory as eight patterns (numbered USER1

through 8).