Specifications

(

)

The following conditions must be satisfied:

• Material type: 3M Scotchcal Mastercut

• Special stand (a roll material must be set at the rear and on the sheet hanger)

• Side margins: 25 mm (1 in.) or more for both the left and right margins

• Front margin: 30 mm (1-3/16 in.) or more

(After loading the material, using the display menu to select [F-EDGE] as the material type automatically sets a front

margin of 30 mm (1-3/16 in.).)

• Use of the display menu’s [AREA] function to perform feed of the material length plus 0.2 m and set the material correctly

• Cutting the following data one time

Origin

(1) The letters are cut in order starting with “R”

(2) After the last letter (“P”) has been cut, the machine returns to the origin

point and the outer border is cut

The origin is rotated 90 degrees ([ROTATE] on the display menu is set to [90deg]).

Feed length

Material with a width exceeding 610 mm (24 in.): 4,000 mm (157-7/16 in.)

Material with a width of 610 mm (24 in.) or less: 8,000 mm (314-15/16 in.)

Cut width

Fills the

hard clip

Front margin: 30 mm (1-3/16 in.) or more

Side margins: 25 mm (1 in.) or more

Side margins:

25 mm (1 in.)

or more

Movable

pinch roller (left)

Movable pinch roller (right)

Blade protector