User`s manual

9
3-1 Setting Up and Connection
3 Setup
Ground the unit with the ground
wire.
Failure to do so may result in risk of
electrical shock in the even of a mechanical
problem
Do not use with any electrical power
supply that does not meet the
ratings displayed on the unit.
Use with any other power supply may lead
to fire or electrocution.
Install on a stable surface.
Failure to do so
may result in
falling of the unit,
leading to injury.
NOTICE Never install this unit in any of the following situations, as it could result in damage:
Places where the installation surface is unstable or not level.
Places with excessive electrical noise.
Places with excessive humidity or dust.
Places with poor ventilation, because the CM-500/400/300 generates considerable heat during operation.
Places with excessive vibration.
Connect the cable to either the parallel or the serial port. Be sure that the power to both the computer and the
main unit is switched off when connecting the cable.
Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation. Doing so may lead to faulty operation or breakdown.
For an explanation of how to assemble the unit and the stand (PNS-500/400/
300), refer to the “ASSEMBLY INSTRUCTIONS” included with the stand.
When using the unit while mounted on a stand, be sure to ensure a sufficient
amount of installation space for the unit. The required installation spaces for
each model are listed below.
CM-500 : 1200 mm (47-1/4") high, 1700 mm (66-15/16") wide,
and 900 mm (35-7/16") depth
CM-400 : 1200 mm (47-1/4") high, 1500 mm (59-1/16") wide,
and 900 mm (35-7/16") depth
CM-300 : 1200 mm (47-1/4") high, 1250 mm (49-1/4") wide,
and 900 mm (35-7/16") depth
The material moves while cutting is in progress. Objects which may
obstruct material movement must not be placed within 60 cm (23-5/8")
to the front or rear of the unit.
600 mm
(23-5/8")
600 mm
(23-5/8")
Setting Up
Use only with the power cord
included with this product.
Use with other than the inculuded power
cord may lead to fire or electrocution.