User`s manual

26
4-8 When Cutting is Completed
When not in use for extended
periods, unplug the power cord from
the electrical outlet.
Failure to do so may
result in danger of
shock, electrocution,
or fire due to
deterioration of the
electrical insulation.
Do not leave the tool mounting screws tightened. Tightening the screw makes it more difficult to install the
blade holder.
NOTICE
2
(1) Loosen the tool securing screw on the cutting
carriage.
(2) Remove the blade holder from the cutting carriage.
3
Press the push-pin and remove the blade from the
blade holder.
If a blade was used, wipe the blade with a soft cloth to
remove any material that may cling to it.
Press the push-pin
Blade holder
Blade
4
Turn off the power.
1
Lower the sheet loading levers and remove the
material.
Cutting carriage
POWER/ERROR LED
goes out
remove the
Material
Tool securing screw