User`s manual

45
Mechanism
Driving method
Maximum cutting area
Acceptable media widths
Width of material that
can be cut off
Acceptable paper widths
Acceptable paper types
Tools
Max. cutting speed
Specifications
High-quality paper
Cutters: Special cutter for CAMM-1 series
Pens: Water-based fiber-tipped pens, and Thick water-based fiber-tipped pens (options)
During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45° direction)
10—850 mm/sec. (in increments of 10 mm/sec.)
20—350 gf (in increments of 10 gf)
0.0125 mm/step (*0.000492"/step)
0.025 mm/step (0.000984"/step)
Error of less than +/- 0.2% of distance traveled, or 0.1mm (0.00394"), whichever is greater
0.1 mm or less (excluding stretching/contraction of the material)
Range for assured repetition accuracy (*)
For materials with a width exceeding 610 mm (24"): Length 4,000 mm (157-7/16") (CM-500/400 only)
For materials with a width of 610 mm (24") or less : Length 8,000 mm (315-15/16")
Parallel (Centronics compatible), Serial (RS-232C)
2 MB (1.3 MB for replot buffer)
CAMM-GLIII (mode1 and mode2)
Power switch, Pen force slider
MENU, ENTER ,TEST, SETUP, PAUSE, SHEET CUT, , , ,
POWER LED, SETUP LED, PAUSE LED
Liquid crystal display unit: 16-character by 2 lines
1.0 A/117V, 0.5A/220-230V, 0.5A/230-240V
Cutting mode: under 62dB (A) Standby mode: under 40dB (A)
(According to ISO 7779)
Width: 737 mm (29")
Length: 24998 mm (984-1/2")
Min. 50 mm (2") / Max. 915 mm (36")
(50—540 mm (2"—21") ,
582—915 mm (23"—36"))
0—812 mm (0"—32")
Min. 50 mm (2") / Max. 915 mm (36")
(50—540 mm (2"—21") ,
582—915 mm (23"—36"))
CM-300
Main unit
With stand
Main unit
With stand
For items indicates by an asterisk "*", please see the next page.
Width: 1000 mm (39")
Length: 24998 mm (984-1/2")
Min. 90 mm (3-1/2") / Max. 1178 mm (46")
0—1067 mm (0"—42")
Min. 90 mm (3-1/2") / Max. 1178 mm (46")
CM-400
Width: 1195 mm (47")
Length: 24998 mm (984-1/2")
Min. 90 mm (3-1/2") / Max. 1372 mm (54")
0—1270 mm (0"—50")
Min. 90 mm (3-1/2") / Max. 1372 mm (54")
CM-500
Media-movement method
Digital control servo motor
1128 mm (W) x 286 mm (D) x 281 mm (H)
(44-7/16" (W) x 11-13/16" (D) x 11-5/16" (H))
1128 mm (W) x 756 mm (D) x 1142 mm (H)
(44-7/16" (W) x 29-13/16" (D) x 44-15/16" (H))
27 kg (59.5 lb.)
50 kg (110.2 lb.)
1391 mm (W) x 286 mm (D) x 281 mm (H)
(54-13/16" (W) x 11-5/16" (D) x 11-1/8" (H))
1391 mm (W) x 756 mm (D) x 1142 mm (H)
(54-13/16" (W) x 29-13/16" (D) x 44-15/16" (H))
35 kg (77.2 lb.)
60 kg (132.3 lb.)
1586 mm (W) x 286 mm (D) x 281 mm (H)
(62-1/2" (W) x 11-5/16" (D) x 11-1/8" (H))
1586 mm (W) x 756 mm (D) x 1142 mm (H)
(62-1/2" (W) x 29-13/16" (D) x 44-15/16" (H))
41 kg (90.4 lb.)
67.5 kg (148.8 lb.)
Cutting speed
Blade force
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Interface
Buffer size
Instruction system
Switches
Control switches
LED
Display
Power consumption
Acoustic noise level
Dimensions
Weight
Operating temperature
Operating humidity
Accessories
5—40°C (41—104°F)
35—80% (non-condensing)
Power cord x 1, Blade holder (XD-CH2) x 1, Blade (ZEC-U5025) x 1, Test-use water based fiber tipped pen x 1,
Test-use sheet x 1, Test-use application tape x 1, Tweezers x 1, Replacement blade for separating knife x 1,
CAMM-1 DRIVER for windows® 95 x 1, User’s manual x 1