User`s manual

46
(
*
)
The following conditions must be satisfied:
- Material type: 3M Scotchcal Mastercut Film, ARLON Series 2100
- Special stand (a roll material must be set at the rear and on the inner sheet hanger)
- Side margins: 25 mm (1") or more for both the left and right margins
- Front margin: 25 mm (1") or more
(After loading the material, using the display menu to select “EDGE” as the material type automatically sets a front margin of
25 mm (1").)
- Use of the display menu’s “AREA” function to perform feed of the material length plus 0.2 m and set the material correctly
- Cutting of the following data one time
X
Y
Origin
(1) The letters are cut in order starting with "R"
(2) After the last letter ("P") has been cut, the machine returns to the origin
point and the outer border is cut
The origin is rotated 90 degrees ("AXIS" on the display menu is set to "90deg").
Feed length
Sheets with a width exceeding 610 mm (24"): 4,000 mm (157-7/16")
Sheets with a width of 610 mm (24") or less : 8,000 mm (315-15/16")
Cut length
Fills the
hard clip
Front margin: 25 mm (1") or more
Side margins: 25 mm (1") or more
Side margins:
25 mm (1")
or more
Movable
pinch roller (left)
Movable pinch roller (right)
Cutter
protector