User Manual

16
8.
Operation of the OCTA-CAPTURE
The screen indicates “Ready to install
the driver.” With power to the OCTA-
CAPTURE switched o, use a USB
cable to connect it to your computer.
If any other message appears, proceed as
directed by the message.
9.
Operation of the OCTA-CAPTURE
Switch on the OCTA-CAPTURE’s power (p. 31).
The driver will be installed automatically.
* It can take several minutes for the driver installation to complete
When the installation is completed, the “OCTA-CAPTURE Driver Setup” dialog box will indicate
“Installation has been completed.”
10. Click [Close] to close the “OCTA-CAPTURE Driver Setup” dialog box.
If the “System Settings Change” dialog box appears, click [Yes].
Windows will automatically restart.