User Manual

48
Setting Explanation
TYPE
ECHO: Echo will be applied.
ROOM: Reverb that simulates the reverberation of a room.
SMALL HALL,
LARGE HALL:
Reverb that simulates the reverberation of a hall; produces a more spacious
reverberation than ROOM.
OFF: No reverb will be applied.
PRE-DELAY
Adjusts the time from when the direct sound is output until the eect sound
is output. Lengthening the pre-delay will create an eect in which multiple
sounds are heard.
TIME Adjusts the time over which the reverberation decays to silence.
You can adjust the PRE-DELAY and TIME parameters for each TYPE.
If you click the [Initial Setting] button, the settings will return to their factory-set state.
Multi-Monitor button
If you click the [Multi-Monitor] button, you’ll be able to independently control the four direct mixers
A–D.
Direct mixers A--D will output directly to OUTPUTs 1–8.
Choose this setting if you want to output to four separate monitor systems (p. 64).
Patch Bay
OUTPUT 1-2
OUTPUT 3-4
OUTPUT 5-6
OUTPUT 7-8
OUTPUT 9-10
Direct Mixer A
WAVE OUT 1-2
3-4
5-6
7-8
9-10
B
C
D
Output Jacks 1–2
/Headphone Jack
Output Jacks 3–8
COAXIAL output jack
9-10