Operation Manual

8
B. HOW TO CONNECT
Power
Supply
Active Speaker
Active Monitor
CD player
Turntable
PC/MAC
DVS
Audio Interface
Inputs
Outputs
Turntable
Typical connection example is shown in the above diagram.
To use the DJ-99 DVS connection for DVS system, please refer to the below steps:
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
1. Connect your turntable to the LN/PH input jack of DJ-99, and select the LN/PH selector to “PH” position.
2. Connect the DVS SEND output jack of DJ-99 to the input jack of your DVS audio interface.
3. Connect the output jack of your DVS audio interface to the DVS RETURN input jack of DJ-99.
4. Select the input selector on DJ-99’s top panel to “DVS” position.
5. Time code audio signal from the turntable will be by-passed to your audio interface through the DVS SEND output jack, and
audio signal from your audio interface will be returned to the DJ-99 through the DVS RETURN input jack.
C. USING WITH THE ORIGINAL INNOFADER
The DJ-99 is also compatible with the original innoFADER as below table. For more information on innoFADER, please visit Audio Innovate website.
http://www.innofader.com/
mini innoFADER innoFADER innoFADER Pro
Channel fader
x x
(
Crossfader
( ( (
WARNING
5 Users will take their own risk for the customization. Faulty operations may cause damages to the mixer.
5 Opening the cabinet voids the warrantee even if the warrantee period has not expired.