User Manual

23
System Settings
Returning to the Factory Settings (Factory Reset)
The system settings and TR-S patterns stored in the DJ-808 can be returned
to their factory-set state (factory reset).
1. Hold down the [BACK] button of the browser section, and press
the [POWER] switch to turn on the power.
The display indicates “
rst
,” and the [START/STOP] button of the TR-S
section blinks.
* If you decide to cancel the operation, turn o the power.
2. Press the blinking [START/STOP] button.
Factory reset begins.
When the display indicates “
O cW
,” factory reset is complete.
NOTE
Never turn o the power until the display indicates “
O cW
.”
3. After the factory reset is complete, press the [POWER] switch to
turn the power o and then on again.