Owner`s manual

51
Playing a pattern
Chap. 2
Switching the display
You can switch the pattern play screen between
the “chord progression display” (4 measures x 3
lines/2 measures x 3 lines/1 measure x 3 lines)
and the “pattern display.”
1. Press [DISPLAY].
Press the button repeatedly to cycle through
the available choices for the display, as
follows:
fig.02-040
■ Chord progression display
fig.02-050d
(1) Pattern mode
(2) Pattern number
(3) Current Tempo
(4) Current key
(5) Pattern name
An “*” displayed in front of the pattern name
indicates that the pattern has been edited.
(6) Time signature
(7) Measure – Beat
Indicates the current location.
(8) Current chord → Next chord
The current chord and next chord are shown
in greater detail.
(9) Chord progression
Shows the chord progression of the pattern.
The cursor will move as playback progresses,
indicating the currently playing measure.
Press [DISPLAY] to choose the desired type
of display for the chord progression area;
either “4 measures x 3 lines,” “2 measures x 3
lines,” or “1 measure x 3 lines.” When fewer
measures are displayed in a single screen,
you will be able to see the chord progression
in greater detail.
fig.02-060d
■ Pattern display
fig.02-070d
( 10 ) Step
A grid display shows ● symbols to indicate
the timing of the important instruments (hi-
hat, snare, kick) and the timing at which bass
notes are played.
The display will change as playback
progresses.
Chord progression display (4 measures x 3 lines)
Chord progression display (2 measures x 3 lines)
Chord progression display (1 measure x 3 lines)
Pattern display
(
1
)(
2
)
(
3
)(
4
) (
6
) (
7
) (
8
)
(
5
)
(
9
)
4 measures
x 3 lines
2 measures
x 3 lines
1 measure
x 3 lines
(
1
)(
2
) (
6
) (
7
)
(
3
)(
4
) (
10
)
(
5
)