Owner`s manual
Introduction
10
15 16
15
[COMPUTER/TAB] switch
Determines the operating mode and sampling frequency of the DUO-CAPTURE EX.
MEMO
For details, refer to the “Read Me First” leaet.
Switch position Explanation
COMPUTER
48/44.1
Select when connecting to a computer (Windows or Mac OS X).
The included USB driver allows you to record, play, and edit high-quality audio with stable
timing.
Set the switch to the sampling rate you want to use.
TAB
Select when connecting to a tablet device.
There is no need to install the included USB driver.
In this mode, the DUO-CAPTURE EX operates on power from the batteries or the optional
AC adaptor.
The sampling frequency is xed at 44.1 kHz.
MEMO
Before changing the position of the [COMPUTER/TAB] switch, exit all software that’s running
and turn the DUO-CAPTURE EX o.
16
[DIRECT MONITOR] switch
Determines whether the audio signals input via the INPUT 1 and INPUT 2 jacks are output directly.
For information about how the audio signal is handled, refer to the block diagram at the end of
this document.
Switch position Explanation
MONO Monitor in monaural.
STEREO Monitor in stereo.
OFF
Select when monitoring using the DAW software. Only audio input via the
DUO-CAPTURE EX’s USB port can be monitored.
When using with GarageBand, set to “OFF.”
MEMO
• When a guitar is connected to the INPUT 1 jack and nothing is connected to the INPUT 2 jack,
set to “MONO.”
• Even when set to “MONO,” a stereo audio signal is output from the DUO-CAPTURE EX’s USB
port.