User`s manual

3 Replacement of Main Parts
36
3
8
9
Attach the Spindle Belt and tighten up the screws of the
Flange.
Connect the Spindle Motor Cable and pack it with
INSULOCK TIE, and fix the Z Cable Cover.
SpringTighten up the screw with the collar and tighten the other
screws temporarily to the Flange and put the Spring.
Z Cable Cover
Spindle Motor
Cable
7
Screws
Spindle Belt
Please be careful not to pinch the Cable by the Z
Cable Cover.
Flange
Screw with the collar
When fixing the Spindle Motor Pulley, it is
necessary to align the top end of the Spindle
Motor Pulley and the top end of the Motor Shaft.
It is necessary to fix the Set Screw against the D-
Cut part of the Motor Shaft.
<Top View of the Spinlde Motor Pulley>
Set Screw
Motor Shaft
Pulley
D-cut part
<Side View of the Spinlde Motor Pulley>
Motor Shaft
Top Part
6
Fix the Spindle Motor Pulley to the Spindle Motor with the
Set Screw.
Spindle
Motor
Pulley