User`s manual

3 Replacement of Main Parts

Connect the X Motor Cable to the XY Junction Board.

XY Junction

Board

X Motor Cable

Attach the Spring and tighten up the screws.

Spring

Flange

Drive Belt

Put through the X Motor Pulley to the Drive Belt.

Then, tighten up the Screws with the collar and the other

Screws temporarily to the Motor Flange.

Screws

Drive Belt

Flange

Screws with the collar

Turn on the Power while pressing the [ ], [ ], [ ]

keys to enter the Service Mode.

Select the [LOAD] menu by pressing the [MENU] key and

press [ENTER] key.

CHECK MODE

LOAD CON. CARD

[ ], [ ], [ ] + POWER ON

[ENTER] key

[MENU] key