User`s manual

3 Replacement of Main Parts

Attach the Spring and tighten up the screws.

Then, connect the Y Motor Cable.

Spring

Drive

Belt

Put through the Y Motor Pulley to the Drive Belt and tighten

the Flange with the Motor temporarily.

Turn on the Power while pressing the [ ], [ ], [ ]

keys too enter the Service Mode.

Select the [LOAD] menu by pressing the [MENU] key and

press [ENTER] key.

CHECK MODE

LOAD CON. CARD

[ ], [ ], [ ] + POWER ON

[ENTER] key

[MENU] key

Select the [AXIS Y] in the [LOAD] menu and press [ENTER]

key. Then, Carriage moves to the Limit Position.

Enter the value 500 and press the [ENTER] key.

AXIS X Y Z S

[ENTER] key

AXIS X Y Z S

VALUE 500

[ENTER] key

AXIS X Y Z S

VALUE 500 OK