Manualshelf

User`s manual

ManualsBrandsRoland ManualsElectronic KeyboardE-600
41424344454647484950
3 Replacement of Main Parts
46
3
7
Remove the Z Motor and change it to the new one. Then
tighten up the screws for fixing the Z Motor.
Screws
<View Point>
Cable Direction
<Bottom View>
Screws
Z Motor Cable
When fixing the Z Motor, be careful with the
direction.
Fix the Z Motor Shaft to the Boss part of the Z
Screw while taking care with the cable direction
as the figure.
6
Detach the Carriage Unit from the Carriage Base.
Carriage Unit
Z Motor
5
Remove the 4 screws fixing the Carriage Unit.
And loosen the 2 Set Screws on the Boss Part of the Z
Screw.
Then, Loosen the 2 Screws on the Z Screw Support.
Screws
Boss Part of the
Z Screw