User`s manual

3 Replacement of Main Parts

Connect the INSULOCK TIEs and the Sponge as the figure.

Tighten up the Spindle Motor Cable Bush.

Connect the Z Motor Cable, Z Limit Cable and Spinle Motor

Cable to the XY Junction Board.

Then, fix the Limit Switch and the Junction Board Cover.

Be careful with the position of the Sponge.

It is necessary to put it beside the Cable Holder.

Sponge and

INSULOCK TIE

INSULOCK

TIEs

Cable

Holder

Turn on the Power while pressing the [ ], [ ], [ ]

keys to enter the Service Mode.

Select the [LOAD] menu by pressing the [MENU] key and

press [ENTER] key.

Spindle Cable Bush

Tighten up the screws fixing the Carriage Unit.

Screws

Carriage Unit

CHECK MODE

LOAD CON. CARD

[ ], [ ], [ ] + POWER ON

[ENTER] key

[MENU] key