User`s manual

3 Replacement of Main Parts
49
3
17
After setting the value, the load check starts.
The Carriage moves in the Z direction to check the load.
If the check is OK, fix the Cover.
If the check is NG, repeat 8 to 10 and 14 to 15 .
16
Select the [AXIS Z] in the [LOAD] menu and press [ENTER]
key. Then, Carriage moves to the Limit Position.
Enter the value 350 and press the [ENTER] key.
AXIS X Y Z S
[ENTER] key
AXIS X Y Z S
VALUE 350
[ENTER] key
AXIS X Y Z S
VALUE 350 OK