User`s manual

3 Replacement of Main Parts

After setting the value, the load check starts.

The Carriage moves in the Y direction to check the load.

If the check is OK, fix the Covers.

If the check is NG, repeat 6 to 13 .

Select the [AXIS Y] in the [LOAD] menu and press [ENTER]

key. Then, Carriage moves to the Limit Position.

Enter the value 500 and press the [ENTER] key.

AXIS X Y Z S

[ENTER] key

AXIS X Y Z S

VALUE 500

[ENTER] key

AXIS X Y Z S

VALUE 500 OK

Turn on the Power while pressing the [ ], [ ], [ ]

keys too enter the Service Mode.

Select the [LOAD] menu by pressing the [MENU] key and

press [ENTER] key.

CHECK MODE

LOAD CON. CARD

[ ], [ ], [ ] + POWER ON

[ENTER] key

[MENU] key