User`s manual

7 Service Activities

Accessories

Remove the

retainers.

1. Use the included wrench (10mm) and hexagonal wrench (3mm) to remove the

retainers on the side of the unit. Then, lower the unit from the base.

Operation panel : 1

Operation-panel

connector cable : 1

Power cord : 1

Depth regulator

nose unit : 1

Wrenches

(17 mm : 1, 10 mm : 1)

Solid collet : 1 (*1)

Hexagonal wrench

(3 mm) : 1

Hexagonal screw driver (2

mm) : 1

Roland Software Package

CD-ROM : 1

Clamps : 4 (*2)

User's Manual : 1

Follow the steps in "Unpacking and Repacking" on the packing carton to take out the

included items and accessories. Before you attempt installation, make sure all the included

items are present.

*1 This is for diameter 4.36 mm character cutters and flat cutters. It cannot be used with diamond

scrapers or end mills.

*2 The bolts and nuts are installed on the machine. (They are used for attaching the packing

retainers.)