Owner`s manual

10
Setting Up Logic Pro 8 for M-16DX DAW Control
Basic Setup for Alternative and Exclusive Modes
If the M-16DX’s USB button is flashing, press it once so it’s not before
proceeding. By activating DAW mode on the M-16DX at the right
moment, Logic Pro automatically configures itself for the M-16DX.
To configure Logic Pro 8 for control from the M-16DX, follow these steps:
With the M-16DX connected to your Mac, launch Logic Pro 8.
1
If the M-16DX’s USB button isn’t lit, press it to light it.2
Press the M-16DX’s USB button again so it flashes.3
In Logic Pro 8, the DAW Surfaces Setup window automatically opens
and displays a Logic Control control surface—the M-16DX emulates
an Emagic Logic Control when it’s controlling Logic Pro.
Close the DAW Control Surface Setup window in Logic Pro 8.4
You’re ready to control Logic Pro 8 from the M-16DX in Alternative mode.
To jump back to the pre-programmed Logic Pro 8 assignments
for Alternative mode, click here.
Additional Setup for Exclusive Mode
Optimizing Solo and Mute Control in Logic Pro
To get Logic Pro’s Solo and Mute switches to mirror the M-16DX’s:
From the Logic Pro menu, select
1 Preferences > Control Surfaces >
Controller Assignments...
Press Input Channel 1’s Solo button on the M-16DX so it latches in. 2
Logic Pro’s Controller Assignments window selects Track 1’s Solo
assignment in the right-hand part of the window as circled here.