Owner`s manual

8
Click Import...9
Navigate to the Edirol M-16DX ALT_EXC.spp file and select it as 10
shown here.
The .spp file adds the M-16DX’s control assignments to SONAR/LE.
Click Open to import the file.
11
Click Close in the Cakewalk Plug-in Manager window.12
In the Options menu, select 13 Controllers/Surfaces...
In the Controllers/Surfaces window, click the Add new Controller/
14
Surface button—the red arrow points at the button in this
illustration—to open the Controller/Surface Settings window.
In the Controller/Surface Settings window, set Controller/Surface 15
to Cakewalk Generic Surface, and the Input Port and Output Port
settings to 1:EDIROL M-16DX, as shown here.
Click OK to close the window and reveal the newly created control 16
surface.
Click Close.17
From the Tools menu, select Cakewalk Generic Surface-1 to open the 18
Cakewalk Generic Surface-1 properties window.
In the Presets popup, select the Edirol M-16DX ALT (for “Alternative”)
19
or EXC (for “Exclusive”) Mode preset, depending on whether you
want to use the M-16DX in Alternative or Exclusive DAW-control
mode as shown in the following illustration.