Owner`s manual

ManualsBrandsRoland ManualsMusical equipmentEXR-46OR

EXR-46 OR

The EXR-46 OR’s Function mode contains more advanced settings you may not need every day. They allow you to fine-tune your instrument’s response. It would therefore be a good idea to familiarize yourself

with these parameters. Most settings (“*”) can be written to a User Program (see p. 45). Other parameters (“°”) are saved to the Flash memory when you leave the Function mode.

Editing parameters (general

procedure)

You can edit the EXR-46 OR’s Function parameters via the dis-

play. Here is a general outline of the procedure for all parame-

ters discussed below:

(1) Press [FUNCTION].

(2) Use FAMILY [√][®] to select the Function group that con-

tains the desired parameter:

■ KB SET: KbdTouch, MsterTune, USRTrnsp, GLB Trnsp,

TransMod, PB Range, KeySplit, SpltHold, SpltInt, FSW, Port

Main, Port Dual, Mode Main, Mode Dual

■ DRUM PAD: DK1/DrumPad1~DK8/DrumPad8

■ METRONOM: Mtro TS, MetroVol, Count-In

■ OCTAVE: MAIN Oct, DUAL Oct, SPLT Oct

■ VOLUME: Main Vol, Dual Vol, SplitVol, Auto Bass,

AccDrums, AccBass, Accomp1~Accomp6, Song1~Song16

■ ARR SET: ArrChord, Arr Hold, EP Chord, Bass Inv, MI (Mel-

ody Intelligence), InEnCHRD, Sync Stop

■ EFFECTS: REV (Reverb), CHR (Chorus), MFX, Tone MFX, Rev

MAIN, Chr MAIN, Pan MAIN, Rev DUAL, Chr DUAL, Pan DUAL,

RevSPLIT, ChrSPLIT, PanSPLIT

■ KB SCALE: Scale C/C#/D/Eb/E/F/F#/G/Ab/A/Bb/B, Scale

Mode

■ MIDI: Local, MidiTxRx, Sync Rx, Style PC, LyricsTx,

NTARx14, PitchBnd, Modulatn, ProgChng, Velo Rx, Clock Tx,

StartStp, SongPosP

■ UTILITY: LockInit, InitFLASH, Resume

■ WriteSNG (see p. 49)

■ WriteSTL (see p. 50)

■ RemoveSNG (see p. 50)

■ Remove STL (see p. 51)

■ WriteUPG (see p. 50)

■ ReadUPG (see p. 50)

■ RemovUPG (see p. 51)

(3) Use SELECT [√][®] to select the parameter you wish to edit

(see below).

Note: In FUNCTION mode, SELECT [√][®] do not allow you to

jump from one family to the next.

The “VALUE” message and a setting appear to signal that you

can change (“edit”) the selected parameter.

(4) Use the DATA ENTRY [–][+] or numeric buttons (only for

values) to modify the setting of the selected parameter.

Note: See also page 20.

Note: To return to the default value of the currently selected

parameter, press [+] and [–] simultaneously.

(5) Use FAMILY [√][®] to select another Function parameter.

(6) Continue with step (3).

(7) Press another “big” button in the DATA ENTRY section to

leave this function.

KB SET parameters

■

Kbd Touch*

(1~127, Default setting: 110) Use this parameter to set the

EXR-46 OR’s fixed velocity value that will be used when the

icon is not displayed. See p. 34.

Note: This parameter can also be selected by pressing and holding

[KEYBOARD¥TOUCH].

■

MstrTune° (Master Tune)

(427.4~452.6, Default setting: 440.0) This parameter allows you

to change the EXR-46 OR’s overall tuning, which may be nec-

essary when you accompany a singer, an acoustic instrument,

or when you play to a recording on CD or cassette.

■

USRTrnsp*

(–12~12, Default setting: 0) Use this parameter to transpose

the EXR-46 OR in semitones. If you’re not sure what transposi-

tion is, see p. 32. This parameter can also be selected by press-

ing the [TRANSPOSE] button.

■

GLBTrnsp

(–6~5, Default setting: 0) Use this parameter to temporarily

transpose the EXR-46 OR in semitones. If you’re not sure what

transposition is, see (see p. 33). This parameter can also be

selected by pressing the [TRANSPOSE] button and pressing

SELECT [®] once.

12. Function menu

FUNCTION

FAMILY

SELECT

KEY TOUCH