User's Manual
Table Of Contents
- Contents
- Operation Guide
- Panel Descriptions
- Before You Play
- Various Settings (Function Mode)
- Basic Operation in Function Mode
- Adjusting the Keyboard Sensitivity (Key Touch)
- Changing the Way in Which the Sound Is Heard (Twin Piano Mode)
- Dividing the Keyboard for Two-Person Performance (Twin Piano)
- Specifying What the Transpose Will Affect (Transpose Mode)
- Transposing the Keyboard or Song (Transpose)
- Applying a Headphones 3D Ambience Effect to the Piano Sound (Headphones 3D Ambience)
- Matching the Pitch with Other Instruments (Master Tuning)
- Changing the Tuning Method (Stretch Tuning)
- Changing How the Pedals Work
- Specifying How the Bass Part Behaves (Leading Bass)
- Chord Recognition When Split Is On
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- Copying a Song (Copy Song)
- Bluetooth Function
- Bluetooth Page-Turning/MIDI Switching
- Bluetooth Page-Turning Pedal Assignment
- Making the Power Automatically Turn Off After a Time (Auto Off)
- Saving the Settings (Memory Backup)
- Basic Operation in Function Mode
- Restoring the Factory Settings (Factory Reset)
- Specifying the Maximum Volume (Volume Limit)
- Using the Bluetooth® Functionality
- Troubleshooting
- Message List
- USING THE UNIT SAFELY
- IMPORTANT NOTES
Playing Songs from a USB Flash Drive (Sold Separately)
Connecting a USB Flash Drive
NOTE
• If the USB ash drive contains a large number of song les, it may take
some time for the data to be read.
• Use only single-byte alphanumeric characters in the le names.
1. Using your computer, copy your favorite songs onto your USB
ash drive (sold separately).
This digital piano is able to play back SMFs (Standard MIDI Files) or audio
les (WAV) from a USB ash drive.
Playable formats
Type Explanation
SMF Standard MIDI les (format 0, 1)
WAV WAV format, 44.1 kHz, 16-bit linear
2. Connect your USB ash drive to the USB MEMORY port of the
digital piano.
Playing Songs
1. Press the [Song] button.
2. Use the [-] [+] buttons to select a song.
N.01
MEMO
• If you’ve selected an audio le (WAV le), a dot is displayed following the
last digit.
N.02.
The les on the USB ash drive are shown. “
N
” indicates a USB ash drive.
The numbers are assigned automatically. If you later add or delete a le,
the numbers will be automatically reassigned.
• All les on the USB ash drive begin with “
N
.”
• If you use the [-] [+] buttons to make the display indicate “
U
” or “
a
,” les in
the digital piano’s internal memory are displayed.
3. Press the [s] button to play the selected song.
The display shows the measure number of the currently playing SMF.
If a WAV le is playing, the elapsed playback time is shown.
1.01
(Example: 1 minute 1 second has elapsed)
Lower the Level of an Audio File’s Central Sound
This feature lets you reduce the loudness of the central sound of the audio
(Center Cancel).
1. When a song is selected, hold down the [s] button and use the
[-] [+] buttons to turn this feature “
On
.”
NOTE
This feature does not work perfectly with every song In some cases it may
be unable to fully eliminate the central sound, or may alter the recording’s
tone quality.
About USB Flash Drives
If you’re using a newly purchased USB ash drive, you must rst format it on the digital piano.
NOTE
• Never insert or remove a USB ash drive while this unit is turned on. Doing so may corrupt the unit’s data or the data on the
USB ash drives.
• Carefully insert the USB ash drives all the way in—until it is rmly in place.
• Use USB Flash memory sold by Roland. We cannot guarantee operation if other products are used.
Formatting a USB Flash Drive
Here’s how to initialize (format) the entire contents saved on a USB ash drive.
NOTE
• Formatting will erase everything that has been saved on the USB ash drive.
• Before using a new USB ash drive with this digital piano for the rst time, you must format the USB ash drive.
1. Connect the USB ash drive that you want to format to the USB MEMORY port.
2. While holding down the [Song] button, turn the power on.
Keep holding down the [Song] button until it indicates as “
Svr
” on the display.
To cancel, press the [y] button.
3. To execute the format, press the [s] button.
When all the LEDs on the buttons are lit, the operation is complete.
4. Turn the power o, then on again.
Bottom panel of digital piano
7