User's Manual
Table Of Contents
- Contents
- Quick Operation
- Panel Descriptions
- Before You Play
- Panel Descriptions
- Before You Play
- Playing
- Listening to Songs
- Practicing/Recording
- Connecting a Mobile Device via Bluetooth
- Connecting a Mobile Device via Bluetooth
- Reference
- Connecting the Equipment
- Playing
- Listening to Songs
- Recording Your Performance
- Creating Your Own Piano Tone (Piano Designer)
- Connecting the Piano and a Mobile Device via Bluetooth
- Convenient Functions
- Making Various Settings (Function Mode)
- Basic Settings in Function Mode
- Turning the Bluetooth Function On/Off (Bluetooth On/Off)
- Adjusting the Volume of Bluetooth Audio (Input/Bluetooth Vol.)
- Playing Different Tones with the Left and Right Hand (p. 19)
- Playing Two Tones Layered on Each Key (p. 19)
- Dividing the Keyboard for Two People (Twin Piano)
- Transposing the Pitch of the Song Playback (Song Transpose)
- Adjusting the Song (SMF) Volume (Song Volume SMF)
- Adjusting the Song (Audio) Volume (Song Volume Audio)
- Adjusting the Volume of an Audio Playback Device (Input/Bluetooth Vol.)
- Adjusting the Volume from the Computer (USB Audio Input Volume)
- Setting the Song (SMF) Playback Mode (SMF Play Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing How the Pedals Work (Center Pedal)
- Changing the Effect of the Pedal (Left Pedal)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Ch.)
- Changing the Language Displayed in the Screen (Language)
- Adjusting the Brightness of the Display (Display Contrast)
- Specifying the Time Until the Operating Panel Dims (Screen Saver)
- Specifying a Maximum Volume (Volume Limit)
- Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)
- Making the Power Automatically Turn off After a Time (Auto Off)
- Saving Settings Automatically (Auto Memory Backup)
- Settings Saved Even If the Power Is Turned Off
- Basic Settings in Function Mode
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Index
14
Practicing/Recording
Practicing with the Metronome
Recording Your Keyboard Performance
Here’s how to perform along with the metronome. You can also change
the metronome’s tempo and time signature.
1. Press the [ ] button.
The button blinks, and you hear the metronome.
2. Practice along with the metronome.
3. To stop the metronome, press the [
] button once again.
The button goes dark.
Changing the tempo
1. Press the [ ] button.
The display shows the current tempo.
2. Turn the [ ] knob to change the tempo.
Changing the time signature
1. Press the [ ] button and [ ] button simultaneously.
The Metronome setting screen appears.
2. Turn the [ ] knob to access the “Beat” screen.
3. Press the [
] knob to move the “-” “+” symbols to the
lower line of the screen.
4. Turn the [ ] knob to select the time signature.
Available time
signatures
2/2, 3/2, 2/4, 3/4, 4/4, 5/4, 6/4, 7/4, 3/8, 6/8,
8/8, 9/8, 12/8 (default value: 4/4)
5. Press the [ ] button several times to return to the
previous screen.
You can record your own keyboard performance, and then play back to
check it.
Getting Ready to Record
1. Select the tone that you want to play.
2. You can sound the metronome if you like.
Press the [ ] button.
While listening to the metronome, specify the song’s tempo and time
signature.
Starting/Stopping Recording
3. Press the [7] button.
The [t] button lights, the [s] button blinks, and the piano enters
record-standby mode.
If you decide to cancel recording, press the [t] button once again.
4. Press the [s] button.
After a one-measure count, recording starts, and the [7] button and
[s] button are both lit.
MEMO
You can also start recording by playing the keyboard instead of
pressing the [s] button. In this case, a count is not sounded.
5. Play.
6. To stop recording, press the [s] button once again.
Recording stops.
The performance is saved automatically.
Listening to the Recorded Performance
7. Press the [s] button.
After you record, the newly recorded song is selected.
The recorded song starts playing back.
Deleting a Saved Song
1. While holding down the [7] button, press the [ ] button.
The “Delete Song - Media” screen appears.
2. Press the [ ] knob to conrm.
The “Delete Song - Song” screen appears.
3. Press the [ ] knob to conrm.
A conrmation message appears.
4. Turn the [ ] knob to select “Yes,” and press the [ ] knob
to conrm.
The deletion is executed.