User's Manual
Table Of Contents
- Contents
- Quick Operation
- Panel Descriptions
- Before You Play
- Panel Descriptions
- Before You Play
- Playing
- Listening to Songs
- Practicing/Recording
- Connecting a Mobile Device via Bluetooth
- Connecting a Mobile Device via Bluetooth
- Reference
- Connecting the Equipment
- Playing
- Listening to Songs
- Recording Your Performance
- Creating Your Own Piano Tone (Piano Designer)
- Connecting the Piano and a Mobile Device via Bluetooth
- Convenient Functions
- Making Various Settings (Function Mode)
- Basic Settings in Function Mode
- Turning the Bluetooth Function On/Off (Bluetooth On/Off)
- Adjusting the Volume of Bluetooth Audio (Input/Bluetooth Vol.)
- Playing Different Tones with the Left and Right Hand (p. 19)
- Playing Two Tones Layered on Each Key (p. 19)
- Dividing the Keyboard for Two People (Twin Piano)
- Transposing the Pitch of the Song Playback (Song Transpose)
- Adjusting the Song (SMF) Volume (Song Volume SMF)
- Adjusting the Song (Audio) Volume (Song Volume Audio)
- Adjusting the Volume of an Audio Playback Device (Input/Bluetooth Vol.)
- Adjusting the Volume from the Computer (USB Audio Input Volume)
- Setting the Song (SMF) Playback Mode (SMF Play Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing How the Pedals Work (Center Pedal)
- Changing the Effect of the Pedal (Left Pedal)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Ch.)
- Changing the Language Displayed in the Screen (Language)
- Adjusting the Brightness of the Display (Display Contrast)
- Specifying the Time Until the Operating Panel Dims (Screen Saver)
- Specifying a Maximum Volume (Volume Limit)
- Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)
- Making the Power Automatically Turn off After a Time (Auto Off)
- Saving Settings Automatically (Auto Memory Backup)
- Settings Saved Even If the Power Is Turned Off
- Basic Settings in Function Mode
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Index
22
° Recording Your Performance
Recording Your Keyboard Performance
You can record your own keyboard performance, and then play back
to check it.
Getting Ready to Record
1. Select the tone that you want to play.
2. You can sound the metronome if you like.
Set the metronome’s tempo and time signature. The metronome
setting is stored in the song, and you can use the same settings
during playback.
3. Press the [7] button.
The [t] button lights, the [s] button blinks, and the piano
enters record-standby mode.
If you decide to cancel recording, press the [t] button once again.
Starting/Stopping Recording
4. Press the [s] button.
After a one-measure count, recording starts, and the [7]
button and [s] button are both lit. The performance is saved
automatically.
MEMO
You can also start recording by playing the keyboard instead of
pressing the [s] button. In this case, a count is not sounded.
5. To stop recording, press the [s] button once
again.
Recording stops.
Listening to the Recorded Performance
6. Press the [s] button.
After you record, the newly recorded song is selected.
The recorded song starts playing back.
Deleting a Saved Song
You can delete a song that you saved.
MEMO
5 You can also delete a recorded song by holding down the [7]
button and pressing the [
] button.
5 If you want to delete all songs that have been saved to internal
memory, initialize the memory (“Initializing the Memory (Format
Media)” (p. 30)).
1. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access the “Delete Song”
screen.
3. Press the [ ] knob to conrm.
The “Delete Song - Media” screen appears.
4. Turn the [ ] knob to select the media that contains
the song you want to delete, and press the [
] knob
to conrm.
5. Turn the [ ] knob to select the song that you want
to delete, and press the [
] knob to conrm.
A conrmation message appears.
If you decide to cancel, press the [ ] button.
6. Turn the [ ] knob to select “Yes,” and press the [ ]
knob to conrm.
The deletion is executed.
7. Press the [ ] button.
You exit function mode.
Managing Songs You Recorded
You can rename a saved song.
1. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access the “Rename Song”
screen.
3. Press the [ ] knob to conrm.
The “Rename Song - Media” screen appears.
4. Turn the [ ] knob to select the media that contains
the song you want to rename, and press the [
]
knob to conrm.
5. Turn the [ ] knob to select the song that you want
to rename, and press the [ ] knob to conrm.
6. Rename the song.
Operating the Unit
Select the character which
you want to change
Turn the [
] knob
Change the character
Press the [ ] knob (conrm)0
Turn the [ ]knob (change the
character)0
Press the [ ]knob (back)
Insert one character
Press the [s] button
Delete one character
Press the [7] button
7. Turn the [ ] knob to select the ( at the right edge of the
screen, and then press the [ ] knob to conrm.
A conrmation message appears.
8. Turn the [ ] knob to select “Yes,” and press the [ ]
knob to conrm.
The song is renamed.
* Never turn o the power or disconnect the USB ash drive while
the screen indicates “Executing...”
9. Press the [ ] button.
You exit function mode.