User's Manual
Table Of Contents
- Contents
- Quick Operation
- Panel Descriptions
- Before You Play
- Panel Descriptions
- Before You Play
- Playing
- Listening to Songs
- Practicing/Recording
- Connecting a Mobile Device via Bluetooth
- Connecting a Mobile Device via Bluetooth
- Reference
- Connecting the Equipment
- Playing
- Listening to Songs
- Recording Your Performance
- Creating Your Own Piano Tone (Piano Designer)
- Connecting the Piano and a Mobile Device via Bluetooth
- Convenient Functions
- Making Various Settings (Function Mode)
- Basic Settings in Function Mode
- Turning the Bluetooth Function On/Off (Bluetooth On/Off)
- Adjusting the Volume of Bluetooth Audio (Input/Bluetooth Vol.)
- Playing Different Tones with the Left and Right Hand (p. 19)
- Playing Two Tones Layered on Each Key (p. 19)
- Dividing the Keyboard for Two People (Twin Piano)
- Transposing the Pitch of the Song Playback (Song Transpose)
- Adjusting the Song (SMF) Volume (Song Volume SMF)
- Adjusting the Song (Audio) Volume (Song Volume Audio)
- Adjusting the Volume of an Audio Playback Device (Input/Bluetooth Vol.)
- Adjusting the Volume from the Computer (USB Audio Input Volume)
- Setting the Song (SMF) Playback Mode (SMF Play Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing How the Pedals Work (Center Pedal)
- Changing the Effect of the Pedal (Left Pedal)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Ch.)
- Changing the Language Displayed in the Screen (Language)
- Adjusting the Brightness of the Display (Display Contrast)
- Specifying the Time Until the Operating Panel Dims (Screen Saver)
- Specifying a Maximum Volume (Volume Limit)
- Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)
- Making the Power Automatically Turn off After a Time (Auto Off)
- Saving Settings Automatically (Auto Memory Backup)
- Settings Saved Even If the Power Is Turned Off
- Basic Settings in Function Mode
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Index
19
° Playing
Playing Dierent Tones with the Left and
Right
Hand
You can perform using dierent tones in the left and right regions of
the keyboard, divided at a specic note. This setting is called “Split
Play,” and the point at which the keyboard is divided is called the
“split point.”
1. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access the “Keyboard Mode”
screen.
3. Press the [ ] knob to conrm, and then turn the [ ]
knob to select “Split.”
4. Press the [ ] button to exit function mode.
The split screen appears.
Right-hand tone
Left-hand tone
Item
When you turn the power on, “
Concert Piano
” is selected as the right-
hand tone and “A.Bass+Cymbl” is selected as the left-hand tone.
When split turns on, the keyboard settings are as follows.
Left-hand tone Right-hand tone
Split point (Power-up default): F#3
5. To exit Split Play, press the [ ] button to enter
function mode, and change “Keyboard Mode” to
“Whole.”
Changing the settings for Split Play
To edit the following settings, access the Split screen.
Operating the Unit
Changing the left-hand
tone (Split–Left Tone)
1. Press the [ ] button or the [ ] button.
The tone group is selected.
2. Turn the [ ] knob to select a tone.
* If you select a sound from the [ ] button as the
left-hand tone, it sounds dierent than usual.
Changing the right-hand
tone (Split–Right Tone)
1. Press the [ ] knob so that “-” “+” is shown in
the top line of the screen.
2. Turn the [
] knob to access “Right Tone”
screen.
3. Press the [
] knob to conrm.
4. Press the [
] button or the [ ] button.
The tone group is selected.
5. Turn the [ ] knob to select a tone.
Changing the point
at which tones are
separated (Split–Point)
1. Press the [ ] knob so that “-” “+” is shown in
the top line of the screen.
2. Turn the [
] knob to access the screen of
the item you want to set.
3. Press the [
] knob to conrm.
4. Turn the [
] knob to select the value that
you want to change.
Changing the volume
balance of the left-hand
tone and right-hand tone
(Split–Balance)
Changing the octave of
the left-hand tone and
right-hand tone (Split–
Left/Right Shift)
Playing Two Tones Layered on Each Key
You can play two tones simultaneously from a single key. This
function is called “Dual Play.”
1. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access the “Keyboard Mode”
screen.
3. Press the [ ] knob to conrm, and then turn the [ ]
knob to select “Dual.”
4. Press the [ ] button to exit function mode.
The dual screen appears.
tone 1
tone 2
Item
When you turn the power on, “Concert Piano” is selected for tone
1 and “SymphonicStr1” is selected for tone 2.
5. To exit Dual Play, press the [ ] button to enter
function mode, and set “Keyboard Mode” to
“Whole.”
MEMO
You can also access the Dual screen by pressing the [
] button and
[ ] button simultaneously. Press the buttons simultaneously once
again to exit Dual Play.
Changing the Settings for Dual Play
To edit the following settings, access the Dual screen.
Operating the Unit
Changing tone 2
(Dual–Tone 2)
1. Press the [ ] button or the [ ] button.
The tone group is selected.
2. Turn the [ ] knob to select a tone.
* If you select a sound from the [ ] button as tone 2,
it sounds dierent than usual.
Changing tone 1
(Dual–Tone 1)
1. Press the [ ] knob so that “-” “+” is shown in
the top line of the screen.
2. Turn the [
] knob to access “Tone 1” screen.
3. Press the [
] knob to conrm.
4. Press the [
] button or the [ ] button.
The tone group is selected.
5. Turn the [ ] knob to select a tone.
Changing the volume
balance of the two
tones (Dual–Balance)
1. Press the [ ] knob so that “-” “+” is shown in
the top line of the screen.
2. Turn the [
] knob to access the screen of the
item you want to set.
3. Press the [
] knob to conrm.
4. Turn the [
] knob to select the value that you
want to change.
Changing the octave of
the two tones
(Dual–Tone 1/Tone
2 Shift)