User's Manual
Table Of Contents
- Contents
- Quick Operation
- Panel Descriptions
- Before You Play
- Panel Descriptions
- Before You Play
- Playing
- Listening to Songs
- Practicing/Recording
- Connecting a Mobile Device via Bluetooth
- Connecting a Mobile Device via Bluetooth
- Reference
- Connecting the Equipment
- Playing
- Listening to Songs
- Recording Your Performance
- Creating Your Own Piano Tone (Piano Designer)
- Connecting the Piano and a Mobile Device via Bluetooth
- Convenient Functions
- Making Various Settings (Function Mode)
- Basic Settings in Function Mode
- Turning the Bluetooth Function On/Off (Bluetooth On/Off)
- Adjusting the Volume of Bluetooth Audio (Input/Bluetooth Vol.)
- Playing Different Tones with the Left and Right Hand (p. 19)
- Playing Two Tones Layered on Each Key (p. 19)
- Dividing the Keyboard for Two People (Twin Piano)
- Transposing the Pitch of the Song Playback (Song Transpose)
- Adjusting the Song (SMF) Volume (Song Volume SMF)
- Adjusting the Song (Audio) Volume (Song Volume Audio)
- Adjusting the Volume of an Audio Playback Device (Input/Bluetooth Vol.)
- Adjusting the Volume from the Computer (USB Audio Input Volume)
- Setting the Song (SMF) Playback Mode (SMF Play Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing How the Pedals Work (Center Pedal)
- Changing the Effect of the Pedal (Left Pedal)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Ch.)
- Changing the Language Displayed in the Screen (Language)
- Adjusting the Brightness of the Display (Display Contrast)
- Specifying the Time Until the Operating Panel Dims (Screen Saver)
- Specifying a Maximum Volume (Volume Limit)
- Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)
- Making the Power Automatically Turn off After a Time (Auto Off)
- Saving Settings Automatically (Auto Memory Backup)
- Settings Saved Even If the Power Is Turned Off
- Basic Settings in Function Mode
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Index
29
° Convenient Functions
Loading/Saving Piano Setups
You can save your own piano settings in a USB ash drive, or load
them into the other digital piano.
* Settings can be loaded only into another piano of the same
model.
Settings that are saved
Setting Page
Speaker volume p. 6, p. 10
Headphone volume p. 7, p. 11
Ambience p. 20
Brilliance p. 20
Headphones 3D Ambience p. 20
Key Touch p. 20
Master Tuning p. 25
Temperament p. 25
Temperament Key p. 25
Hammer Response p. 25
Piano Tone settings p. 26
Volume Limit p. 34
Saving Piano Settings (Piano Setup Export)
1. Connect your USB ash drive to the USB Memory
port.
2. Press the [ ] button.
The button is lit, and the piano is in function mode.
3. Turn the [ ] knob to access “Piano Setup Export”
screen, and then press the [ ] knob.
The Piano Setup Export screen appears.
4. Rename the piano settings.
Select the character
which you want to
change
Turn the [
] knob
Change the
character
Press the [ ] knob (conrm)0
Turn the [ ]knob (change the
character)0
Press the [ ]knob (back)
Insert one character
Press the [s] button
Delete one
character
Press the [7] button
5. Turn the [ ] knob to select the ( at the right
edge of the screen, and then press the [ ] knob to
conrm.
The settings are saved.
NOTE
Never turn o the power or remove the USB ash drive while the
screen indicates “Executing...”
6. Press the [ ] button to exit function mode.
The button goes dark.
Loading Piano Settings (Piano Setup Import)
1. Connect your USB ash drive to the USB Memory
port.
2. Press the [ ] button.
The button is lit, and the piano is in function mode.
3. Turn the [ ] knob to access “Piano Setup Import”
screen, and then press the [ ] knob.
The Piano Setup Import screen appears.
4. Turn the [ ] knob to select the piano settings that
you want to load.
5. Press the [ ] knob to conrm.
A conrmation message appears.
If you decide to cancel, press the [ ] button.
6. Turn the [ ] knob to select “Yes,” and press the [ ]
knob to conrm.
The settings are loaded.
NOTE
Never turn o the power or remove the USB ash drive while the
screen indicates “Executing...”
7. Press the [ ] button to exit function mode.
The button goes dark.