User Manual

Playing Arpeggios
34
Importing a Computer SMF File into an
Arpeggio Style (Import SMF)
You can create an original arpeggio style by importing an SMF
(Standard MIDI File).
SMF that can be imported
• Only SMF format 0 is supported. If the data is incorrect,
a message of “Cannot Import SMF Format 1!” or
“Incorrect File!” appears.
• The following data can be imported into an arpeggio:
note data, control change data, channel pressure, and
pitch bend change.
• A maximum of 500 events of note data can be imported,
with each note-on/o message counting as one event.
• In addition to note events, a total of up to 500 events of
control change messages, channel pressure, and pitch
bend can be imported. If you try to import more than the
allowable number of events, the message “Too Much
Data!” appears.
MEMO
• Before you continue, copy an SMF from your computer to the
“IMPORT” folder of the SD card.
• A maximum of 200 les in the “IMPORT” folder can be
detected.
1. Press the [ARPEGGIO] button.
2. Press the [3] (Import SMF) button.
The ARPEGGIO SMF IMPORT screen appears.
3. Use the dial or the [DEC] [INC] buttons to select the SMF
that you want to import, and then press the [7] (Import)
button.
MEMO
You can audition the selected SMF by pressing the [6] (Preview)
button.
4. Use the dial or the [DEC] [INC] buttons to select the
import-destination Style number (U001–U016).
5. Press the [2] (Rename) button and assign a name to the
arpeggio style (p. 45).
6. Press the [7] (Execute) button.
A conrmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
7. Press the [6] (OK) button.
The SMF is imported into the Style number you specied.
Creating an Arpeggio Style from a Song
(Import Song)
You can create an original arpeggio style by importing a track from
the currently selected song.
1. Press the [ARPEGGIO] button.
2. Press the [3] (Import Song) button.
The ARPEGGIO SONG IMPORT screen appears.
3. Use the dial or the [DEC] [INC] buttons to select the track
that you want to import, and then press the [7] (Import)
button.
MEMO
You can press the [6] (Preview) button to audition the selected
track.
4. Use the dial or the [DEC] [INC] buttons to select the
import-destination Style number (U001–U016).
5. Press the [2] (Rename) button and assign a name to the
arpeggio style (p. 45).
6. Press the [7] (Execute) button.
A conrmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
7. Press the [6] (OK) button.
The track of the song is imported into the specied Style number.