User Manual

Editing a Tone
48
PCM Drum Kit (PCMD)
Partial 88
Comp+EQ 1
Comp+EQ 4
Comp+EQ 2 Comp+EQ 5
Comp+EQ 3 Comp+EQ 6
Pitch
Env
TVF Env TVA Env
WAVE TVF
TVA
Partial 1
MFX
Tab Explanation
Common Settings that apply to the entire tone.
Wave
Settings for the waveform that is the basis of the
tone.
WMT
(Wave Mix Table)
Make settings for velocity-switching between tones.
Pitch Settings related to pitch.
Pitch Env Settings for the pitch envelope.
TVF Settings related to the lter.
TVF Env Settings for the TVF envelope.
TVA Settings related to volume.
TVA Env Settings for the TVA envelope.
Output Settings related to output.
Comp
Settings for the Drum Comp + EQ Assign part
compressor.
EQ
Settings for the Drum Comp + EQ Assign part
equalizer.
MFX Settings for the multi-eect.
MFX Control Settings for controlling MFX via MIDI.
MEMO
• You can press a key to switch the partial number that you’re
editing.
• The Drum Comp+EQ Assign part setting is located in the overall
settings for the studio set.
• You can’t edit the sounds of the GM2 bank.
Saving a Tone/Drum Kit
Edits you make to a Tone/Drum Kit are temporary; they will be lost
when you turn o the unit or select another Tone/Drum Kit. If you
want to keep an edited Tone/Drum Kit, you must save it.
NOTE
When you execute the Write operation, the existing data at the
write destination will be overwritten.
1. Press the [WRITE] button.
The WRITE MENU window appears.
2. Move the cursor to “Tone” and press the [ENTER] button.
3. Use the dial or the [DEC] [INC] buttons to select the
save-destination.
4. Press the [2] (Rename) button and assign a name to the
tone/drum kit (p. 45).
5. Press the [7] (Write) button.
A conrmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
6. Press the [6] (OK) button.
The tone/drum kit is saved.
NOTE
Never turn o the power while data is being saved.
Initializing a Tone (Tone Initialize)
Here’s how to initialize the settings of the current tone.
1. In the TONE EDIT screen (p. 46), press the [5] (Tone Utility)
button.
2. Choose “Tone Initialize,” and press the [7] (Select) button.
A conrmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
3. Press the [6] (OK) button.
The tone or drum kit is initialized.
NOTE
Never turn o the power while initialization is in progress.