User Manual

Editing a Tone
49
Performance
Functions
Editing
Sequencer
(Creating Songs)
Sampler Pads DAW
Appendix
Overview Performing SettingsEditing
Selecting the Partials That Sound
(Partial Switch)
You can select the partials/waves that are sounded by a
SuperNATURAL synth tone, PCM synth tone, or PCM drum kit.
1. In the TONE EDIT screen (p. 46), press the [2] (Partial Sw)
button.
2. Use the [4] (Sw 1)–[7] (Sw 4) buttons to select the partials/
waves that you want to sound, and then press the [2]
(Exit) button.
MEMO
• For a SuperNATURAL synth tone, you can use the [5] (Sw 1)–[7]
(Sw 3) buttons to select partials.
• You can use the pads to select partials (p. 84).
Selecting the Partials to Edit (Partial
Select)
Here’s how to select the partials of a SuperNATURAL synth tone,
SuperNATURAL drum kit, PCM synth tone, or PCM drum kit.
1. In the TONE EDIT screen (p. 46), press the [3] (Partial Sel)
button.
2. Use the [4] (Select 1)–[7] (Select 4) buttons to select the
partials that you want to edit, and then press the [2] (Exit)
button.
* You can’t turn o all of the partials.
MEMO
• For a SuperNATURAL synth tone, you can use the [5] (Select
1)–[7] (Select 3) buttons to select partials.
• For a SuperNATURAL drum kit, you can select only one partial.
• You can use the pads to select partials (p. 84).
Initializing a Partial (Partial
Initialize)
Here’s how to initialize a partial of a SuperNATURAL synth tone,
SuperNATURAL drum kit, PCM synth tone, or PCM drum kit.
1. In the TONE EDIT screen (p. 46), press the [5] (Tone Utility)
button.
2. Select “Partial Initialize” and press the [7] (Select) button.
3. Select the partial that you want to initialize, and press the
[7] (Select) button.
A conrmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
4. Press the [6] (OK) button.
The partial is initialized.
NOTE
Never turn o the power while initialization is in progress.
Copying a Partial (Partial Copy)
Here’s how to copy the partial settings of a SuperNATURAL synth
tone, SuperNATURAL drum kit, PCM synth tone, or PCM drum kit.
1. In the TONE EDIT screen (p. 46), press the [5] (Tone Utility)
button.
2. Select “Partial Copy” and press the [7] (Select) button.
3. Select the copy-source partial and copy-destination
partial.
A conrmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
4. Press the [6] (OK) button.
The partial is copied.