User Manual

Recording the Song
59
Performance
Functions
Editing
Sequencer
(Creating Songs)
Sampler Pads DAW
Appendix
Overview Performing Settings
Sequencer
(Creating Songs)
Realtime Recording
Here’s how to do realtime recording.
1. Prepare for recording (p. 58).
2. Press the [SEQUENCER] button.
The SEQUENCER screen appears.
3. Use the cursor [ ] [ ] buttons to select the track that
you want to record.
4. Press the [ ] button.
The [ ] button blinks; the FA is in the record-standby condition.
The Realtime Rec Standby window appears.
5. Make settings for realtime recording.
Use the cursor buttons to select a parameter, and use the dial to
edit the value.
Parameter Value Explanation
COUNT IN
Selects the way in which recording is started.
OFF
Recording begins immediately when you
press the [
] button.
1 MEAS
When you press the [
] button, a
count begins from one measure before
the recording start location; recording
begins when the recording start location
is reached.
2 MEAS
When you press the [
] button, a
count begins from two measures before
the recording start location; recording
begins when the recording start location
is reached.
WAIT NOTE
Recording begins when you press the
[
] button, or when you press a key,
press a pad, or press the hold pedal.
LOOP SWITCH OFF, ON
Species whether loop recording will
(ON) or will not (OFF) occur.
LOOP
LENGTH
001–997
Species the length (number of
measures) over which the loop will
repeat.
Parameter Value Explanation
INPUT
QUANTIZE
Quantize is a function that automatically corrects
inaccuracies in the timing at which you play the keyboard
or the pads, tightening-up the rhythmic accuracy.
You can apply the quantize function during realtime
recording. This setting species whether quantize will be
applied during recording.
OFF Quantize is not applied during recording.
GRID
Grid quantize is applied during
recording. Use this when you need
accurate timing, such as for drums or
bass.
SHUFFLE
Shue quantize is applied during
recording. Use this when you want a
bouncy rhythm such as shue or swing.
RESOLUTION
Species the note timing value at which quantization is
applied.
GRID: 1/32 (
)–1/4 ( )
SHUFFLE: 1/16 (
)–1/8 ( )
STRENGTH 0–100 %
This setting is used with grid quantize.
It species the degree to which your
notes are moved to precise intervals
of the note values specied by the
RESOLUTION setting. If this is set to
“100 %,” the notes that you record are
moved all the way to exact intervals of
the specied RESOLUTION. With lower
percentages, less correction is applied.
If this is set to “0 %,” the timing is not
corrected at all.
RATE 0–100 %
This setting is used with shue quantize.
If this is set to “50 %,” the notes sound
at equal intervals. Raising the value
produces a bouncy feel as with dotted
notes.
50 5050 50
90 10 90 10
Rate = 50 %
Rate = 90 %
TEMPO REC OFF, ON
Species whether tempo changes are
(ON) or are not (OFF) recorded.
If you want the tempo to change during
the song, record those tempo changes
in the tempo track (tempo recording). If
tempo changes were already recorded,
they are rewritten.
RHY PTN
SYNC START
OFF, ON
Species whether the currently selected
rhythm pattern is automatically played
and recorded (ON) or not recorded (OFF)
when recording starts.
MEMO
• If you’re using loop play ([LOOP] button lit), the starting
measure specied by Start Point is the recording start location.
• If you press the [6] (Click) button, a click is heard at the specied
tempo. The click turns on/o each time you press the button.