User Manual

Editing the Song
65
Performance
Functions
Editing
Sequencer
(Creating Songs)
Sampler Pads DAW
Appendix
Overview Performing Settings
Sequencer
(Creating Songs)
For details on the basic procedure for Track
Modify functions, refer to p. 64.
Item Parameter Value Explanation
Quantize
Strength 0–100 %
Use this setting when applying grid quantize. It species how greatly the notes will be moved toward
intervals of the note value specied by Grid Resolution.
If this is set to “100 %,” notes will be moved all the way to precise intervals of the Grid Resolution timing.
With lower values, less timing correction is applied to the notes. With a setting of “0 %,” no timing
correction is applied.
Rate
Use this setting when applying shue quantize. If this is set to 50
%, notes will sound at equal spacing. As this value is increased, you
obtain a bouncy eect as with dotted notes.
RANGE MIN, RANGE
MAX
Specify the range of notes that are quantized.
Erase
Erasing Unwanted Performance Data (Erase)
This function erases all performance data from the specied region. Since the erased performance data is replaced by rests, the measures themselves
remain.
TRACK
Species the track(s) from which data is erased.
Track All Tracks 1–16 and the tempo track
Track1–Track16 The specied track
Tempo The tempo track
MEASURE 001–END Species the region of measures from which data is erased.
EVENT
Selects the performance data that is erased.
* “Tempo” can be selected only if TRACK is set to “Tempo.”
ALL All performance data
Note Note messages
Program Change Program change messages
Control Change Control change messages
Pitch Bend Pitch bend messages
Poly Aftertouch Polyphonic aftertouch
Channel Aftertouch Channel aftertouch messages
System Exclusive System aftertouch messages
Tempo Tempo data
Range Min, Range
Max
If EVENT is set to “Note,” “Poly Aftertouch,” “Control Change,” or “Program Change,” you can specify the range of values. Range
Min species the minimum value of the range, and Range Max species the maximum value of the range.
MEMO
• If you want to erase all notes or all polyphonic aftertouch data, set Range Min to “C1” and Range Max to “G9.” If you want to erase
“C4,” set both Range Min and Range Max to “C4.” If you want to erase from “C3” through “C4,” set Range Min to “C3” and Range
Max to “C4.”
• If you want to erase all controller numbers, set Range Min to “0” and Range Max to “127.” If you want to erase all program
numbers, set Range Min to “1” and Range Max to “128.” If you want to erase number 4, set both Range Min and Range Max to
“4.” If you want to erase numbers 3 through 14, set Range Min to “3” and Range Max to “14.”
Delete
Deleting Unwanted Measures (Delete)
This function deletes the performance data from the specied region, moving subsequent measures toward the beginning of the song to close the gap.
The length of the song is shortened according to the number of measures in the deleted region.
TRACK
Species the track(s) from which measures are deleted.
Track All Tracks 1–16, the time signature track, and the tempo track
Track1–Track16 The specied track
Tempo The tempo track
MEASURE 001–END Species the range of measures that are deleted.
Copy
Copying Performance Data (Copy)
This function copies the performance data of the specied region. This is convenient when you want to use a certain phrase repeatedly.
SRC TRACK
Species the copy-source track(s).
ALL Tracks 1–16, the time signature track, and the tempo track
Track1–Track16 The specied track
TEMPO The tempo track
SRC MEASURE 001–END Species the region of copy-source measures.
50 5050 50
Rate = 50 %
90 10 90 10
Rate = 90 %