User Manual

Sampling

Setting the Input Volume (Input

Setting)

Here’s how to set the input volume for the device that’s connected

to the AUDIO INPUT jack or the USB COMPUTER port.

1. In the SAMPLING STANDBY screen (p. 79), press the [2]

(Input Setting) button.

The SYSTEM EFFECTS screen appears.

2. Use the cursor buttons to select a parameter, and use the

dial to change the setting.

Tab Parameter Value

Audio Input Audio Input Level 0–127

USB Audio USB Audio Input Level 0–127

MEMO

You can also access the SYSTEM EFFECTS screen from the

EFFECTS EDIT screen (p. 52).

Moving/Copying a Sample (Clip

Board)

You can move or copy a sample to another pad.

Moving a Sample

1. While holding down the pad that contains the sample you

want to move, press the [CLIP BOARD] button.

2. While holding down the [CLIP BOARD] button, press the

move-destination pad.

The sample is moved.

* If the move-destination pad contains a sample, the message

“Overwrite?” appears. If you want to overwrite, press the [6]

(OK) button; if you decide to cancel, press the [7] (Cancel)

button.

Copying a Sample

1. While holding down the [SHIFT] button and the pad that

contains the sample you want to copy, press the [CLIP

BOARD] button.

2. While holding down the [CLIP BOARD] button, press the

copy-destination pad.

The sample is copied.

* If the copy-destination pad contains a sample, the message

“Overwrite?” appears. If you want to overwrite, press the [6]

(OK) button; if you decide to cancel, press the [7] (Cancel)

button.